I need help finding some ICs for a clone Bounty hunter MD

[Skippy]

"I see U3 and U4 go with TL064 also U4 goes with LM324?"
I apologise, I made an error, probably influenced by your sideways image.
It is intended to read:

U2, U3 : both are TL064

U4 : LM324

Regarding the sideways image:
It's caused by your camera phone. When you take any future photographs, use "landscape format" , and they will appear correctly when you send them to the forum.

[Adam24]

"I see U3 and U4 go with TL064 also U4 goes with LM324?"
I apologise, I made an error, probably influenced by your sideways image.
It is intended to read:

U2, U3 : both are TL064

U4 : LM324

Regarding the sideways image:
It's caused by your camera phone. When you take any future photographs, use "landscape format" , and they will appear correctly when you send them to the forum.

Never mind what about U1

[kt315]

U1 LM339M
U2 TL064C
U3 TL064C
U4 LM324M
U5 CD4016BCM
U6 CD4093BCM

Свершилось!
Сегодня довёл прибор “до ума”,
насколько этого ума хватило.
Разобрал прибор, выкусил микросхемы U2 и U3
тип TL064C по цене 10 центов и запаял вместо
них AD824ARZ-14 по цене 10 долларов.
Заменил конденсатор С26 на 2,2мкФ керамика,
заменил С25 на 470мкФх16В алюминий.
Между резистором R43 (1k) и минусом источника
питания засадил резистор 9,1к, чтобы расширить
диапазон регулировки Sens.
Параллельно источнику питания подключил
конденсатор 2200мкФх35В (там вообще никакого не было!).
Протестировал на воздухе, что из этого
получилось:
1) Чешуйка МихФеда – 9…10см.
2) Денга 1745 (сильно расплющенная) – 17…18см.
3) 5 коп СССР 1953г. – 18…19см.
4) 5 коп Е2 – 21…22см.
На мелкие цели глубина обнаружения выросла в два раза,
а на средние и крупные примерно в полтора раза.
Для пляжного копа – самое то!

[kt315]

"I see U3 and U4 go with TL064 also U4 goes with LM324?"
I apologise, I made an error, probably influenced by your sideways image.
It is intended to read:

U2, U3 : both are TL064

U4 : LM324

Regarding the sideways image:
It's caused by your camera phone. When you take any future photographs, use "landscape format" , and they will appear correctly when you send them to the forum.

do you need part list?

[Adam24]

do you need part list?

Thank you very much

[Adam24]

do you need part list?

I have all parts now but i need the PCB components layout .
for the tracker IV .do you have this ?

[Adam24]

Thank you very much

I mean the schismatic? For the tracker iv

[kt315]

I have all parts now but i need the PCB components layout .
for the tracker IV .do you have this ?

dbanner makes. you may do King Cobra now, while you wait. my opinion. not so bad VLF project. GMT King Cobra VLF metal detector, Tesoro Royal Sabre, bare board pcb DIY | eBay

pleasure

[Adam24]

dbanner makes. you may do King Cobra now, while you wait. my opinion. not so bad VLF project. GMT King Cobra VLF metal detector, Tesoro Royal Sabre, bare board pcb DIY | eBay

pleasure

I appreciate your advice the thing is here in Egypt it's hard to let such items in from abroad,if you have the schismatic for the BH tracker this will be great

[kt315]

ooh... do not remind me Egypt! i was with Fisher-1210 there and it was great time! yes, i would like to sell it there, to leave, but arabics were not be interested in metal detection ((

[Orbit]

ooh... do not remind me Egypt! i was with Fisher-1210 there and it was great time! yes, i would like to sell it there, to leave, but arabics were not be interested in metal detection ((

Kt315 friend, don't stay long in Egypt, they eat more salad there.

[Adam24]

ooh... do not remind me Egypt! i was with Fisher-1210 there and it was great time! yes, i would like to sell it there, to leave, but arabics were not be interested in metal detection ((

Nice pictures,you been to Egypt?
These pics not in Egypt.

[kt315]

Nice pictures,you been to Egypt?
These pics not in Egypt.

if it is not Egypt then Allah is not the God.

[Adam24]

if it is not Egypt then Allah is not the God.

We not talking religion now i just don't see any Egyptian landmark is why they look odd to me ,if it's inside a hotel or whatever

[kt315]

ok.