Announcement

**Functional** · 04-12-2007, 06:26 AM

LINKS To DIY Software, PCB's, Tools, Etc.

Well, I tried to upload the text file that I had copied and pasted into my previous post, only to find theres a size limit and my file is too big, (35 Kb). I don't know if the changes I made to the settings here will allow me to do it this time without it looking like (#@%, but I'll try it one last time.

************************************************** ********

************************************************** ********

CIRCUITS:

(All sorts of circuits: http://www.elektroda.net/cir/ )
Infrared Circuits:
http://www.elektroda.net/cir/index/Infrared%20Circuits/INFRARED%20CIRCUITS.htm

Circuit list ( links ) :
http://www.satsleuth.com/Schematics.htm

Magnetometer (pdf):
http://measure.igpp.ucla.edu/hemisphere/Manuals/Magnetometer.pdf

CCO Metal Detector:
http://circuitdb.com/show.php?cid=127

Geomagnetic field detector:
http://www.electronics-lab.com/projects/science/002/index.html

************************************************** *********

************************************************** *********

MOSTLY DIY ELECTRONICS TOOLS.
_________________

DIY CNC drill: for cutting PCB boards, that cost about $250 for materials: http://home.comcast.net/~scottxs/pcbcnc/cncindex.htm

Electronics Tools:
0-30 VDC STABILIZED POWER SUPPLY WITH CURRENT CONTROL 0.002-3 A
http://www.electronics-lab.com/projects/power/003/index.html

Voltmeter + Ammeter LCD panel
http://www.electronics-lab.com/projects/test/022/index.html

4 - Channel Digital Logic Analyzer and 5 Channel Digital Oscilloscope by using PC Parallel Port
http://www.electronics-lab.com/projects/pc/007/index.html

500W low cost 12V to 220V inverter
http://www.electronics-lab.com/projects/power/033/index.html

Oscilloscope Block Diagram and Schematics
http://members.tripod.com/michaelgellis/scope.html

ASM-1 Analog Synthesizer Module
http://home.swipnet.se/cfmd/synths/friends/stopp/
Synth related friends
http://home.swipnet.se/cfmd/synths/friends/

First oscilloscope for Linux: 100 MHz or 150 MHz Digital Oscilloscope
http://www.sourcefiles.org/Scientific/Electronic/LxScope-0.1.tar.gz

BITSCOPE = PC OSCILLOSCOPES AND ANALYZERS
THE BITSCOPE DESIGN
http://www.bitscope.com/design/
# 115 kb/s Serial Interface or
# 625 kb/s 10BaseT Ethernet Interface
# 1.25 Mb/s USB Interface
Schematics:
http://www.bitscope.com/design/hardware/

(Included only because its kind of novel.)
PC products Pocket PC products
Virtins Sound Card MultiInstrument Virtins Pocket MultiInstrument
Virtins Sound Card Oscilloscope Virtins Pocket Oscilloscope
Virtins Sound Card Spectrum Analyzer Virtins Pocket Spectrum Analyzer
Virtins Sound Card Signal Generator Virtins Pocket Signal Generator
Virtins Sound Card Probe kit
http://www.virtins.com/page2.html#Pocket%20Instrument

************************************************** ***********

S-video to RCA (Pin out)
http://www.electronics-lab.com/projects/misc/005/index.html

Pinouts for various connectors in Real Life(tm) INDEX V1.53 (9/22/96)
http://margo.student.utwente.nl/el/componen/fpinouts.html
Chapter 9) 10-pin Video Camera connector:
http://margo.student.utwente.nl/el/componen/fpinout3.html#PINOUTS_011

************************************************** *********

************************************************** *********

A do-it-yourself GPS receiver:
http://www.gpskit.nl/index-en.htm
Diagram description GPS support kit:
http://www.gpskit.nl/diagram-description-en.htm
Prices:
http://www.gpskit.nl/prices-en.htm

Garmap CE version 1.78
Garmap CE runs on H/PCs or P/PCs running Windows CE 2.0 (or maybe later).
Garmap CE is freeware.
http://www.catnet.ne.jp/fukuda/garmap/e_garmapce.html

************************************************** *********

************************************************** *********

CNC SOFTWARE and DIY CNC LINKS:
http://www.desktopcnc.com/links.htm

Computer Guided CNC PCB Drill Bot:
http://home.comcast.net/~scottxs/pcbcnc/cncindex.htm
Lots of good links above and below:
http://home.comcast.net/~scottxs/ScottsBkmrks.html
http://home.comcast.net/~scottxs/Halcitrons_misc_survivalism_URLs.html

Professional CAD/CAM for Macintosh and Windows (FREEWARE)
http://www.douglas.com/software/freeware/index.html

FreePCB
http://www.freepcb.com/
Free Routing
Printed Circuit Board Routing Software:
http://www.freerouting.net/

Seetrax CAE Ltd.
Full version of Ranger2, PCB CAD software is now available as a freeware version, as is the limited function Ranger2XL Demo
http://www.everythingpcb.com/p14151.htm#14468

PCB is an interactive printed circuit board editor for the X11 window system.
http://pcb.sourceforge.net/

Autotrax/Easytrax Advanced PCB Plotting
"Advanced postscript plotting software for Autotrax/EasyTrax PCB files. A mature commercial product, released free. **** Plotting features more advanced than the latest verions of Protel. **** Developed to minimise the cost of pcb prototyping, and improve manufacturing." ( About 200 Kb. )
http://sourceforge.net/projects/traxlaserplot/
(Operating System: All 32-bit MS Windows (95/98/NT/2000/XP), All POSIX (Linux/BSD/UNIX-like OSes), Linux
License: BSD License)

NikoTracer is open source, completed project. FreeBSD licence. It was written under Visual Studio C++ 7.1. It is router for topological shems. Woking with PCB PCAD 2002 PCB ASCII files. Any questions to: [email protected]
http://sourceforge.net/projects/nikotracer/
"Operating System: All 32-bit MS Windows (95/98/NT/2000/XP)
License: BSD License"

ParaDef (Parametric Definition System) is a complete CAD/CAE/Product Development solution. ParaDef encompasses all aspects of product development into a single IDE, enabling rapid development of new products and in-depth analysis of existing solutions.
http://sourceforge.net/projects/paradef/

SourceForge Search Results for "PCB":
http://sourceforge.net/search/?words=pcb&type_of_search=soft&pmode=0&limit=50

SourceForge Search Results for "CAD CAM":
http://sourceforge.net/search/?type_of_search=soft&words=cad+cam

SourceForge Search Results for "PCB CAM":
http://sourceforge.net/search/?type_of_search=soft&words=pcb+cam

SourceForge Search Results for "PCB CAD":
http://sourceforge.net/search/?type_of_search=soft&words=pcb+cad

SourceForge Search Results for "PCB Simulation":
http://sourceforge.net/search/?type_of_search=soft&words=pcb+simulation

***********************************************

Electronics Software from SourceForge:

DigitalSimulator
The DigitalSimulator is your Virtual Electronics Lab, allowing you to design, simulate and output your digital circuit board designs. ( About 27 Mb. / source 2 Mb. )
http://sourceforge.net/projects/digisimulator/

Electronic Engineering Tool
A very useful tool when working with electronics, from amature to engineer, ex. Converter: Fahrenheit-Celsius-Kelvin, Dec-Hex-Bin-Oct, etc. Calculator: Ohms Law, Coil Reactance, Capacitor Reactance, Thermal Resistant (C/W), Decibel (dB) etc.
http://sourceforge.net/projects/eetool/
Operating System: Linux / BSD / Unix ONLY!

Analogy
A scene-based environment for the creation and performance of live electronics pieces, using Csound patches, VST plugins and an assortment of native DSP and GUI elements.
http://sourceforge.net/projects/analogy/
Operating System: OS Portable (Source code to work with many OS platforms)

Gnome Assisted Electronics
This is a Computer Aided Electronic Design tool. It features schematic capture, simulation and PCB layout for both analog and numerical componants with the help of Gnome.
http://sourceforge.net/projects/gael/
Operating System: All POSIX (Linux/BSD/UNIX-like OSes)

Gerber Circuit Board Tiler - RS274X
GBTiler, a Gerber circuit board tiling program allows engineers, electronics hobbyists and other users with Gerber RS274X format files to "tile" or combine separate Gerber files -- circuit boards -- into a single, valid Gerber formatted file.
http://sourceforge.net/projects/gbtiler/

*****

APRIL 11, 2007:

ELECTRONICS DESIGN SOFTWARE:

Epulse is a signal generator that can produce pulses, sine, triangular and rectangular waves with an unlimited level of modulations. It can be used in electronics to create test signals, or to make simple audio effects.
http://sourceforge.net/projects/epulse/

MMTL, the Multilayer Multiconductor Transmission Line 2-D and 2.5-D electromagnetic modeling tool suite, generates transmission parameters and SPICE models from descriptions of electronics interconnect dimensions and materials properties.
http://sourceforge.net/projects/mmtl/

EMERGY SIMULATOR
Diagram (JGraph) driven simulator. Bondgraphs > nonlinear differantial system > plot: implemented for economics and ecology. Network analysis: emergy propagation implemented. Would also fit for electronics, mechanics, cost, GWP, footprint analysis.
http://sourceforge.net/projects/emsim/

Digital Signal Analyzer I/O 16 Channel
Software I/O Digital Analyzer and Digital Input/Output Simulator for electronics experiments. It's also a 16 digital channel data logger. Hardware supported: Ethernet I/O Card , USB I/O Card and Parallel Interface.
http://sourceforge.net/projects/fgdianasym/

The KISS Realtime Kernel
The KISS Realtime Kernel is intended for use in deeply embedded applications such as consumer electronics. Being deterministic, small, readable and understandable, it is suitable for applications where deterministic response is primordial.
http://sourceforge.net/projects/kiss/

Java Pic Programmer(Series 16F628 pic)
Java pic programmer for the pic 16F8X / 16F628 series pic chips. The programmer utilises the parallel port to interface with the pic programmers electronics. The Java programmer will initially be targeted at linux OS but, with help, hope to expand the to
http://sourceforge.net/projects/jpicprogrammer/

Resister Ohm finder
This project is a simple program written in C to find out the Value of Ohms in a resister. (Electronics)
http://sourceforge.net/projects/rof/

SAM (Servo Actuation Manipulator)
SAM (Servo Actuation Manipulator) is a GTK+ based X windows application for controlling anywhere from 1 to 254(so far) servo motors via a serial port connection, specifically this program was made for the Scott Edwards Electronics Mini SSC II.
http://sourceforge.net/projects/servo/
( X - Windows ONLY )

Curve Captor
Curve Captor is a free (distributed under GPL) vacuum tube modeling software that brings the advantages of modern computer simulation tools to design of vacuum tube electronics.Curve Captor
http://sourceforge.net/projects/curvecaptor/

ProtoCAD
ProtoCAD is a tool for rapid electronics prototyping using stripboards.
http://sourceforge.net/projects/protocad/

SDR Control
Routines and graphical interface to control and test AMS TOF Electronics
http://sourceforge.net/projects/sdrcontrol/

Open DYI Pack
The goal of this project is to produce and maintain an open source replacement firmware to the popular KITSRUS PIC Programmers sold by many electronics and hobby stores.
http://sourceforge.net/projects/opendiypack/

KTechlab
KTechlab is an IDE for microcontrollers and electronics.
http://sourceforge.net/projects/ktechlab/

GKmap -K-map disclosure
GKmap1.0 is a free K-Map disclosure software, which is developed to solve the Digital Electronics design problems. Along with design it also helps in analysis of information flow in the digital circuits.
http://sourceforge.net/projects/gkmap/

Hobbyist Electronics Projects
Electronic projects described in details. All schematics are given with all details to be friendly with unnexperienced electronic hobbyist
http://sourceforge.net/projects/elec-project/

MegaDCC
MegaDCC is an Atmel based Model train DCC controller aimed to be built by the home user and so tries to keep hardware/electronics knowledge to a minimum.
http://sourceforge.net/projects/megadcc/

open ewb
elctronic workbench that simulate the real electronics world
http://sourceforge.net/projects/gondal/

FastScheme
FastScheme is Open Source Freeware project, which can help electronics developers. Project gets scheme engineering very fast and easy.
http://sourceforge.net/projects/fastscheme/

mcuStudio
mcuStudio is a development environment for Microcontrollers. It's based on Eclipse (plugin). The aim is to provide a high quality development environment for electronics. First editions will target Microchip Pic mcu's. Other mcu will be supported later.
http://sourceforge.net/projects/mcustudio/

pamfes
This site is for publishing sources and compiled documents in a field of Electronics, Micro Processor Programming and Spectral Analisys Of Signals.
http://sourceforge.net/projects/pamfes/

multimeter
the project work as a calculator electronics and electrical problems
http://sourceforge.net/projects/emeter/

clk++ - Typesetting timing diagrams
clk++ is a program for automated typesetting of timing diagrams in digital electronics. Output is PostScript in original, but inheritance can be used to provide both for different output formats and interactive work.
http://sourceforge.net/projects/clkpp/

PCB Designer (Might still have bugs to work out.)
This is an easy-2-use Printed Circuit Board designer program with user-friendly interface and with some interesting capabilities. The full source and the internals are well documented.
http://sourceforge.net/projects/mkpcb/
And:
http://www.teledigit.hu/mkpcb/en/index.html
Operating System: 32-bit MS Windows (95/9

, 32-bit MS Windows (NT/2000/XP), All POSIX (Linux/BSD/UNIX-like OSes)

BOM Generator
Software to generate a Bill of Materials, in various formats, for Eagle or other PCB design tools.
http://sourceforge.net/projects/bomgen/
NO FILES LISTED

Open RiSC-SOM
Project to Open Hardware Designs, Schematics, PCB files, JTags and BSPs of 32bit MMU enabled RiSC-SOM(tm) for non-profit org(s).
http://sourceforge.net/projects/open-risc-som/
Operating System: 32-bit MS Windows (NT/2000/XP), eCos, WinCE, Linux

Free angle PCB routing tool
Free angle Printed Circuit Board push and shove routing tool based on a new numerical stable planar geometry library.
http://sourceforge.net/projects/freerouting/
NO FILES LISTED

OpenPCB
OpenPBC is a simple open source schematic and printed circuitb board(PCB) layout editor. The main goal is, to maintain consistence between the schematic and the layout.
http://sourceforge.net/projects/openpcb/

HobbyPCB
A Windows tool to develop Schematics and PCB's.
http://sourceforge.net/projects/hobbypcb/

kEDA
EDA toolset for the K-Desktop-Environment. The tools will be component library, component library editor, schematic editor, schematic checker, netlister, simulation tools, HDL tools, pcb layout tool, filters to other EDA toos etc.
http://sourceforge.net/projects/keda/

xml4eda
definition of a set of xml-based file formats for EDA data exchange (component library, schematic, simulation, netlist, pcb, drill, pick and place etc.)
http://sourceforge.net/projects/xml4eda/

*****

*****

APRIL 11, 2007

MINERALS:

Geoblock
image Geoblock is a program for 3D modeling, database management and visualization of geoscience datasets. It is designed for mineral deposit exploration, ore reserve estimation, mine planning and simulation of processes in mine sites.
http://sourceforge.net/projects/geoblock/

BandSystem Spectral Analysis System
The 'BandSystem' spectral analysis system is a rule-based system for the classification of mineral spectra. It consists of a preprocessor, a feature extractor, and a rule-based system to identify minerals from infra-red reflectance spectra.
http://sourceforge.net/projects/bandsystem/

cirque
Cirque is an application for the mineral resource industry for all phases of mine development. Cirque is developed using TrollTech's QT library to leverage OpenGL, C++, and platform independence. Cirque will be modular in design for future expansion.
http://sourceforge.net/projects/cirque/

*****

************************************************

GEOLOGY Software:

Rocksnake Geo Mapping Tool
Rocksnake takes localities from geological mapping projects and plots them in 2D, over an optional basemap. Each locality has all the standard geology notebook contents and photos attached to it which can then be viewed from Rocksnake.
http://sourceforge.net/projects/rocksnake/

Geophysics Interactive
Open source geophysical processing and modelling software
http://sourceforge.net/projects/geo-interactive/

Geophysical Software Search Results:
http://sourceforge.net/search/index.php?words=geophysics&type_of_search=soft&pmo de=0&words=geophysical&Search=Search

GPS Software Search Results:
http://sourceforge.net/search/index.php?words=archeology&type_of_search=soft&pmo de=0&words=gps&Search=Search

**************************************************

Tomographic Imaging System GUI:
"The Mechanical Engineering Department at Oregon State University currently has high-resolution x-ray tomography equipment that allows three-dimensional imaging of the interior of objects. Their existing imaging software is command line based and difficult"
http://sourceforge.net/projects/tisgui/

KeyRes Co-Occurrence Features is an advanced features extraction and image processing software for scientific and industrial imaging applications based on Haralick feature functions.
Operating System: 32-bit MS Windows (NT/2000/XP)
License: GNU General Public License (GPL)
http://sourceforge.net/projects/keyrescf/

ODIN is a free software framework for rapid prototyping of magnetic resonance imaging (MRI) sequences. The sequences can be tested, simulated and executed on scanner hardware from different manufacturers.
Operating System: OS Portable (Source code to work with many OS platforms)
License: GNU General Public License (GPL) (Intended for medical apps)
http://sourceforge.net/projects/od1n/

GenericFX
This is a visual pipeline framework for batch processing data. It is written as a plugin to Eclipse Platform. It is a general framework designed to be customized for specific field, e.g., functional Magenetic Resonance Imaging (BrainFX).
Operating System: 32-bit MS Windows (NT/2000/XP), All POSIX (Linux/BSD/UNIX-like OSes)
License: GNU General Public License (GPL)
http://sourceforge.net/projects/genericfx/

The Parallel Seismic Earth Imaging System (PSEIS) is designed for geophysical research and parallel processing of large datasets. Interoperation and emulation are used to leverage other seismic processing software, existing skills and infrastructure.
http://sourceforge.net/projects/pseis/

************************************************** *********

************************************************** *********

Ground Penetrating Radar
(ground probing radar, subsurface radar, georadar, earth sounding radar):
http://www.g-p-r.com/mirrpt99.htm

ultra-modern flat panel radar antenna
http://www.gsfc.nasa.gov/news-release/releases/2002/02-158.htm

(Shotgun Antenna?)
Revolutionary and unusual tubular satellite antenna (LX2000) that can be used in place of a conventional dish:
http://www.pulsat.com/satellite/site/details.php?product_id=181

ANTENNA LINKS Page:
http://www.pacificsites.com/~brooke/Ant.shtml

One coil induction metal detector
http://www.aha.ru/~aish/book2/final.htm

Electromagnetic field detector:
http://www.electronics-lab.com/projects/science/006/index.html

UltraSonic Radar:
(Might be good for divers.)
http://www.electronics-lab.com/projects/sensors/007/index.html

Magnetometer-Gradiometer Kit:
http://www.fatquarterssoftware.com/product.aspx?id=12

Home built mag:
http://www.portup.com/~dfount/proton.htm

Side Scan Sonar:
http://www.portup.com/~dfount/sidescan.htm

************************************************** *********

************************************************** *********

************************************************** *********

************************************************** *********

Links from past TNet posts:

Radar imaging through wall:
http://www.akelainc.com/images/
http://www.akelainc.com/images/06180047.jpg
http://www.akelainc.com/images/04280003.jpg
http://www.akelainc.com/images/04280004.jpg

Handheld Radar Imaging:
http://www.spg-tm.com/systems/radar/sarbar.cfm

Handheld Prism 200 will see through walls with pulsed low-frequency UWB radar:
http://www.electronicproducts.com/ShowPage.asp?FileName=olrc01.jul2005.html

Radar Scope Department of Defence
http://www.defenselink.mil/news/Jan2006/20060103_3822.html

AN/PSS-14 revolutionizes landmine detection by combining Ground Penetrating Radar (GPR), highly sensitive Metal Detector (MD) technology and advanced data fusion algorithms.
http://www.cyterra.com/countermine/an-pss-14.html

SYNTHETIC APERTURE RADAR IMAGING USING A UNIQUE APPROACH TO FREQUENCY-MODULATED CONTINUOUS-WAVE RADAR DESIGN (inexpensive)...... AND INVERSE SYNTHETIC APERTURE RADAR IMAGING
http://www.msu.edu/~charvatg/
http://www.msu.edu/~charvatg/Project_3.html

A High-Speed Continuous Wave GPR:
http://www.springerlink.com/content/w6017l5208061122/

Ground Penetrating RADAR (GPR)
"Antenna, pulse-width, center frequency and sampling:
Most of the GPR systems use dipole antennas, either in monostatic or bistatic arrangement (monostaticwhen the same antenna is use for transmission and reception, and bistatic when two separate antennas are used). The length of the dipole antenna controls the character of the transmitted pulse, mainly the pulse width (duration), dt, so that a broader pulse requires a longer antenna. In practice, an antenna length of 1 m is required for a 10 ns pulse - the efficient GPR transmission duration - while pulses of 1-2 ns widths require antennas of 0.15-0.40 m long."
http://www.geo-sense.com/GPRmore.htm

Frequency Domain Electromagnetic Methods (FDEM)
http://www.geo-sense.com/FDEM.htm

Shallow Seismic Reflection (SSR) Surveys
http://www.geo-sense.com/SSR.htm

Geo-Electrical Resistivity and Conductivity
http://www.geo-sense.com/GecGer.htm

Remote Sensing (RS)
http://www.geo-sense.com/RS.htm

Geo-Magnetic (GM) Surveys
http://www.geo-sense.com/GM.htm
"This type of survey is used to locate faults, mineralized zones, and underground structures associated with ore deposits, as well as oil fields."

Bullard Thermal Imaging for Firefighters
http://www.bullard.com/thermalimager/select_buy/t4.shtml

Assorted Electronic Detection Devices:
http://www.aie.org.uk/resources/aie_tools.html
(Aimed at the Arborist)

Ultrasonic Imaging:

Acoustocam
http://www.imperiuminc.com/app-industrial.html
http://www.imperiuminc.com/industrial%202.htm

Ultrasonic Crawler Systems (for pipeline inspection).
http://www.worldoftest.com/ultrasoniccrawler.htm

Some Ultrasonic detector info.
http://www.ichinoseki.ac.jp/satok/jica4/index.html

Sago Systems
Handheld Passive Millimeter-Wave Imager
http://www.advancedimagingpro.com/article/article.jsp?id=3104&siteSection=8

Hand held Millimeter Wave Viewer
http://www.millivision.com/

Millimeter Wave home made:
http://www.kolumbus.fi/michael.fletcher/q_test.htm
with block diagram (6k)

Microwave Drill:
http://www.eng.tau.ac.il/%7Ejerby/microwave_drill/index.html
US patent # 6,114,676:
http://www.eng.tau.ac.il/%7Ejerby/microwave_drill/US6114676.pdf

************************************************** *********

DIY infrared viewer? Theres a few of them around like this one:
http://geektechnique.org/index.php?id=254
Or this one:
http://www.rpi.edu/~bradfe/NVG2.html

Build your own underwater remote operated vehicle (ROV)" :
http://www.rollette.com/rovrev2/
and this one for a towed ROV:
http://www.engadget.com/2005/08/01/diy-underwater-rov-for-100/

Some commercial and home made DIY links you might find of interest if you decide to look into millimeter waves and microwaves, or ultrasonic viewers:
http://www.camero-tech.com/xaver800.shtml
http://www.sagosystems.com/
http://www.defenselink.mil/news/Jan2006/20060103_3822.html
http://www.cyterra.com/countermine/an-pss-14.html
http://www.electronicproducts.com/ShowPage.asp?FileName=olrc01.jul2005.html

Ultrasonic info:
http://www.imperiuminc.com/app-industrial.html
http://www.ichinoseki.ac.jp/satok/jica4/index.html
under water here:
http://www.rpi.edu/~bradfe/under/under.html

Home made DIY stuff links:
Thinned Array Sidescan Sonar:
http://www.beugungsbild.de/sidescan/sonar_index.html

DIY scuba and underwater photo gadgets:
http://users.ncable.net.au/~anewton/gadgets.html

Dan's Homegrown Sidescan Sonar Page:
http://www.portup.com/%7Edfount/sidescan.htm
Dan's towfish picture:
http://www.portup.com/%7Edfount/fishexpl.gif
Dan's Rebreather Brainstorms:
http://www.portup.com/~dfount/rbmain.htm

Sture Hultqvist's Sonar Project:
http://www.abc.se/~m10354/sture/index.html

Another home made SONAR:
http://www.eddiem.com/projects/chirp/chirp.htm

Cable-bound Underwater Video Camera:
http://www.beugungsbild.de/uw_camera/underwatercamera.html

MORE Infrared:
http://www.lifepixel.com/ir-tutorials/canon-20d-digital-infrared-conversion-instructions.htm

Note: The safest way to view IR is through a IR (or IR modified) digital camera as it converts the infrared to the visible light spectrum.

Commercial Infrared Light Emitting Diode Illuminators, Ready-to-Use PCB & Kits:
http://www.allthings.com.au/Illuminators/illum-diy.html
In the UK:
http://www.rfconcepts.co.uk/DIY.htm

INFRARED GOGGLES FOR UNDER $10
A Human IR Vision Experiment:
http://www.amasci.com/amateur/irgoggl.html
http://amasci.com/amateur/irgogg2.html

Good Source for U.S. MAPS:
http://water.usgs.gov/

************************************************** *********

MISC. DIY

Pulse Charger for reviving tired Lead Acid batteries
http://www.electronics-lab.com/projects/power/036/index.html

Solar charger for lead-acid batteries
http://www.electronics-lab.com/projects/power/031/index.html

Lets see what this looks like when I press submit. Have a nice night.

F.

**Clondike Clad** · 02-09-2008, 02:00 PM

Good list of info

nice

Announcement

LINKS To DIY Software, PCB's, Tools, Etc.

LINKS To DIY Software, PCB's, Tools, Etc.

Comment

Comment