Ivconic Magnetometer/Gradiometer

[bernte_one]

did you test 0,8mm or 1mm nozzle already?

yesterday i sold my tronxy x1 and an old tesoro coil, the new geeetech a10 arrives me end of the week
i think a good Change ;-)

[6666]

Ivconic, does your ender3 have the removable plate ? if not do you think it would make any difference ?

[6666]

This video is worth watching has lots of good tips on ender 3.
https://www.youtube.com/watch?time_c...&v=VHHxkOULP5Q

[ivconic]

Due some sudden objective occurrences my work is delayed for some short period and the things are going very slowly on this subject.
I am still finishing complete enclosure and packaging for the final device outlook.
Code for kits is finished. I only need some time to completely prepare mechanical parts and packaging.
I had to make certain corrections and changes in 3D files. Because cheap 3D printing is carrying certain limitations.
Here are the shots of how it suppose to look finally... except the funny and joyful colors which are highly debatable!
At the time; local provider had only those filament colors available, so i took them for a start and exercise.
So... don't mind the colors!

[ivconic]

New slightly improved enclosure.
Bit larger dimensions, to be able to use it as "universal" enclosure for many other projects too.
Series production in preparations. I intend to offer this complete enclosure as separate product, soon.

[ivconic]

btw...
really sweet car...
let's go crazy!

[ivconic]

all parts...

[bernte_one]

good morning, looks very nice
how long did it take to print?

[ivconic]

good morning, looks very nice
how long did it take to print?

Hello Bernte!
Enclosure base took 19 hours and 20 minutes!!!
I was present all the time, because filament on a reel messed big time, so i had to be there and manually release it at every 10-20 minutes.
That's the only problem with 3D printing that i have now, i have to figure out how to solve it.
There are some solutions on Thingverse, to properly fix the reel and avoid messing.
Problem is that not every thing shared on Thingverse is properly done, that's another thing that i figured out too!
Last night i printed top part, the "cover". It took ~4 hours to print with same profile.
Today i plan to print bottom holder and front panel.
This will be printed only once. As prototype.
Later on it goes to "machining" and preparations for industrial ABS extruding.

[ivconic]

Sudden lack of desired colors sometimes can have certain advantages!
This happened by destiny and not by strict planning!
Who says that serious technology must wear serious colors?!

[ivconic]

[ivconic]

3-button version of the device (no Menu system).
Fourth button is unused.
Unfortunately LCD is "inverse blue" with very low visibility under this and similar conditions.
Just an initial behavior testings.

[ivconic]

It is a problem to obtain proper submersible elements for such underwater device.
Proper enclosures can be obtained, not variety of choices though.
But when it comes to such buttons and knobs... it is a struggle.
Especially if you like to keep your setup decently small with dimensions.
Any ideas?

[ivconic]

[ivconic]

Own software in preparations.
Beta testing.
Live mode = taking samples directly to software via BT.
...
to be continued...