Arc-Geo Logger

[Morris_jo]

Arc-Geo Logger

Hi All:

I have many questions to Time Williams about this device, i hope you can give me some complete answers to them :

1-Does the Arc-Geo Logger work with PI-MDS like: Deepmax X3, LPX2 ?

2-Can you use a 3D software to implement the output signals for a buried target in it`s real time shape ?

3-Does the software (ArcheoSurveyorLT) discriminate metals: Gold,Silver,.....etc ?

4-Does the software (ArcheoSurveyorLT) calculate the target Depth ?


Looking forward ....






Regards

[Tim Williams]

1-Does the Arc-Geo Logger work with PI-MDS like: Deepmax X3, LPX2 ?

It works with all audio form outputs. Yes. IT also works with any treasure related equipment with an audio output.

2-Can you use a 3D software to implement the output signals for a buried target in it`s real time shape ?

Archeosuveyor2 has 3D. The software ArcheosurveyorLT is 2d. I have done it with Rockworks. Yes Look on my site under the GCG.

3-Does the software (ArcheoSurveyorLT) discriminate metals: Gold,Silver,.....etc ?

No the metal detector does that. You can log in all metal, then a log with discrimination to view the difference. In cache hunting most do not use discrimination.

4-Does the software (ArcheoSurveyorLT) calculate the target Depth ?

Depth has been calulated down to 13 feet +-6". It is done using the signal response from the first detection to the decay.


If you have anymore questions and would like to talk over the phone shoot me an email.