Announcement

Collapse
No announcement yet.

Re: Truck at 10 feet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Truck at 10 feet

    >How I can increase coil singnal in PI to achieve greater depth ? There's resistor which leads to coil is that's the way ?


    My guess is that you are looking at the damping resistor. Also, if you do manage to increase the coil signal you might also have to change the sample timing, not sure about this. Eric Foster's forum specializes in pulse induction, I'm just learning.


    What detector do you have?


    - Carl


  • #2
    Re: pi metal detector

    >How I can increase coil singnal in PI to achieve greater depth ? There's resistor which leads to coil is that's the way ?


    My guess is that you are looking at the damping resistor. Also, if you do manage to increase the coil signal you might also have to change the sample timing, not sure about this. Eric Foster's forum specializes in pulse induction, I'm just learning.


    What detector do you have?


    - Carl

    Comment


    • #3
      Re: Truck at 10 feet

      Carl;


      Thanks for the info


      Terry


      Carl Moreland wrote:


      > The Proton Mag Forum


      >


      > Terry,


      >


      > How about a large coil pulse induction unit? Eric Foster was selling a PI


      > board (about $65 I think) that is intended for a towable underwater PI


      > detector. I believe it uses a rather large coil, like the big 6-foot


      > PulseStar setups you can find in the back of a Kellyco catalog. It would


      > probably get a truck at 10 feet easy.


      >


      > - Carl


      >


      > > Dale Seppa;


      > > I have been getting mail from Proton Mag Forum for sometime now, you


      > > don't seem like the genius types not to say your not one, but you pose


      > > answer's for us lay people so we can understand what is being


      > > described(thanks). I posed a question here, that was never fully


      > > answered, only directed to buy someone's expensive design. How to make


      > > a cheap magnetometer like the GI's did after WWII, Iam not looking for


      > > gold. Only some large WWII trucks buried at least 10 to 15ft deep, Iam


      > > working on a shoe string budget. Until I make my find, after which Iam


      > > sure my income should increase..


      > > Any suggestions.


      > > Terry


      >


      > __________________________________________________ ____________________

      Comment

      Working...
      X