Tweet
I want a good magnet to use for testing that various parts used for
magnetometer construction have no traces of ferro magnetic
contamination.
I have an ad for one from American Science and Surplus which reads
as follows:
... 2 1/2" diameter x 7/8" thick magnet with a 3 1/4" high "T"
handle. It has a whopping 50 gauss @ 3/4" and picked up 20 pounds
of solid bar stock in the R&D lab. The appearance is a little rough
- chromed and black steel but scuffed, but functionally it can't be
beat. US$6.50 + shipping and handling of US$5.50. (Total US$12.00
postpaid)
I want something good and this sounds as strong as any I REMEMBER
seeing but I really do NOT know what "50 Gauss" is and how it
compares with other things available. Any help appreciated.
Best regards to all,
Dale
[email protected]
103 North Sixth Avenue
Virginia, MN 55792 USA
magnetometer construction have no traces of ferro magnetic
contamination.
I have an ad for one from American Science and Surplus which reads
as follows:
... 2 1/2" diameter x 7/8" thick magnet with a 3 1/4" high "T"
handle. It has a whopping 50 gauss @ 3/4" and picked up 20 pounds
of solid bar stock in the R&D lab. The appearance is a little rough
- chromed and black steel but scuffed, but functionally it can't be
beat. US$6.50 + shipping and handling of US$5.50. (Total US$12.00
postpaid)
I want something good and this sounds as strong as any I REMEMBER
seeing but I really do NOT know what "50 Gauss" is and how it
compares with other things available. Any help appreciated.
Best regards to all,
Dale
[email protected]
103 North Sixth Avenue
Virginia, MN 55792 USA