Epe pic magnetometer

[mossine]

hello to all
realy its very bad to lost every thing ...
all Attached Files . all lien sites
wen i back i cant foind any thing any thing

[hoseinahir]

hi all
pleas send full Epe pic magnetometer & data loger2 or (hex file) proje for me
[email protected]

[kyrgiz]

magnetomiter kit

www.fgsensors.com has a replacement kit for the Speake sensors and Fat Quarters Gradiometer kit. the site owner says it is easy to make the mag kit into a gradiometer. he sells three levels of assemly with two improved FG3+ sensors with built in filters.

Carl would you please check the kit out and see what it takes to turn into A GRADIOMETER?

Kyrgiz

[kyrgiz]

magnetometer kit

I forgot the price for assembled board Ardunio with two sensors is $167 plus about $10 shipping. assemble yourself for half that price.

Kyrgiz

[payam20]

I have better resolution
[ATTACH]31063[/ATTACH]
[ATTACH]31064[/ATTACH]
[ATTACH]31065[/ATTACH]

hi
nice scan
what is this app ?
is it free ?

[SimonS]

Kyrgiz: yes it can be used as gradiometer. Also arduano program work like gradiometer.

Payem20: Yes program is for free "TreasureHunter3D", but you need to buy detector. Last program is also much better. It use camera for scanning. It is really fun to use this detector https://youtu.be/FWKaieeSY5M

[dsmaxlakmi90]

Hi Leto.
May i have a full files copy of EPE magnetometer?
In advance, many thanks.
my email is [email protected]

[ta2cjj]

fgm3h instead of fgm3h

[QUOTE = Leto; 66915] Hayır, bu Geometrics inc. 'Reddetmek? Ksek ?? Z? N? Rl? Kl? sezyum manyetometresidir. GPS ile monte edildi ..
ligimizin dışına ıkıyor Strujas size bu projenin orijinal oldu g? Ndermek istiyorum - ancak? Tamam mı? K (15 mb). Gmail hesabın veya simmiların var mı? Bana? Zel bir mesaj yaz. [/ QUOTE]

Sevgili Leto,
Yaşım 56.
45 yıldır Elektronikle uğraşıyorum.
33 yıllık Mining Engineer.
And my hobby is Amateur Radio.

Size 2 konu danışmak istiyorum ..

1- Bana Geometrics.inc Sezyum Magnetometre projesi gondermeniz is it possible?

2- For EPE Mag : Fgm3 bende yok. Ama bende 2 adet FGM3h var. Yerine olurmu? Fgm3h Sahip olduğum bu. Cevaplarınıza minnettarım.
Best Regards..
73 's ta2cj de Safak..

[ivconic]

YU1ASB
CQ CQ CQ
73

[ta2cjj]

Tnx de opt. Şafak. Qth Zonguldak/TURKEY Only saturday pm 20:00-22:00 3777 KHz. 3767KHz.

Yaesu FT2000 - DMU2000 Set. + Kenwood TS2000 - Windom Antenna - TMD-710+Gps in my car. Handy is TH79E+FT23


And now, my new disease is detectors!!!.

I respect you all..

73's de ta2cj.




























I respect you all

[amitech1982]

Hello everyone ... I built the machine but noticed that the frequency values change a lot. Is this normal?

[SimonS]

No it is not normal. First at all try it outdoor. It can be some disturbances inside house.
Also check RC filter at sensors and 5V line.

[amitech1982]

on the outside it's the same thing. For the voltage at the sensor terminal I have 5.43 volts.

[amitech1982]

for information, I used 2 sensors fg-3+

[SimonS]

5.43V is OK for FG-3+ sensors. But what is power source? Battery?
Good to have oscilloscope to check power line.