2 photos for Epitopios

[Geo]

Hi.
I add here 2 photos of the teflon with screws that help to regulate my Gradiometer.
My friend Epitopios wanted to see it!!!!
Regards

Πανο μελετατο......

[Krzysztof]

Hi Geo
1. I think these pads are not bolts from the metal!
2. Do some shorter screws will not clog.
3. You screw me do not give anything, struggled in the sensor teflonie tight, then I turned round in a Teflon housing for a minimum differential signal.
Of course, the gradiometer measurement in free space (EMI), directed east-west, 1.5 m above the ground.
No ticks or mobile phones in the area.
Best regards Chris.

[WM6]

I add here 2 photos of the teflon with screws that help to regulate my Gradiometer.

.

Hi Geo

What is this? From what of material is this thing around the sensor?

[Crowbar]

It's sensor label

[WM6]

It's sensor label

Thank you. If so, then probably need some lining under screw to easily regulate position of sensor.

[Geo]

Hi Geo
1. I think these pads are not bolts from the metal!
2. Do some shorter screws will not clog.
3. You screw me do not give anything, struggled in the sensor teflonie tight, then I turned round in a Teflon housing for a minimum differential signal.
Of course, the gradiometer measurement in free space (EMI), directed east-west, 1.5 m above the ground.
No ticks or mobile phones in the area.
Best regards Chris.

Hi Chris.
What are you mean No Mobile phones??? The mobiles or the antennas for mobiles!!!
Because i use the gradiometer with my mobile on me

Regards

[Geo]

Thank you. If so, then probably need some lining under screw to easily regulate position of sensor.

I don't think that it need something more!!!. You do the regulation only one time!!!!

[Krzysztof]

Hi Geo.
I'm sorry bad translation.
The regulation gradiometer can not carry any metal (feromagnetic) tools and equipment.
In the distance lies ticks and mobile phone. Adjustment is to balance and maximum sensitivity.
Any indication of iron stick, it boots, or trouser belt.
Best regards Chris.