If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have standard 8" coil and i'm not satisfied with depth in ground maybe i don't know how to balance detector. Your experience with this detector is good or bad.
Regards Bocha.
Hi
Well my expirence shows that is a good detector. For example i got a 22 mm copper coin buried at 20 centimeters.
I use discrimination set to 11 o´clock, full power and all the rest of controls set to mark setup.
Regards
Nelson
Comment