Tweet
Hello,
I must admit I don't understand too much about electronics but I've some one to help me about it.
I try to read and understand all the message that peoples sended. I'm very thankfull to them for their help and opinions.As on the header I've Micronta 40003 VLF Discriminator. I took this machine from my fatherinlove some years ago. He used this machine only one or two time in his life. There after I tryed to fin manuel(http://www.geocities.com/treasureport//4003.htm) and try to learn how to use it. Unfortunately when I took this machine I thougt I'll be great treasur hunter, for this reason about 3.000 Km, I turned aroud the area that I leave(Turkey). After all this roads, I just found some bottle tap and metal coins then I understood this machine is not good as I think
. Deeply I search for this machine one more time (http://website.lineone.net/~johngl1/3003.html) and I learned this machine good for only 10 cm deep. Then after I give up to be treasure hunting for a long time, untill to loose my job last summer. Since then, I'm looking for the new machine and technologies. My fovorite machine become exp.5000 ( http://www.schatzsuchermagazin.de/exp5000/exp5000.htm ) , luckly one of my friend bought this machine, I didn't have chance to see untill now but he told me, he found royal tomb at 4,5 metter deep. When I heard this my Treasure Hunting wants started again.
I think I'm not able to build a machine like exp.5000 or similar because of their tech. But can I build a machine for 3 metters deep scan? What you propose? Which kind of machine I must build for that. I saw many models scheme from Geotech and other web sites, this made me a bit confuse.
I learned, I must Have one magnometter before detector, are you agree with this?
Can some one tell me how I can modify my Micronta for 2-3 metter deep scan?
best regards
I must admit I don't understand too much about electronics but I've some one to help me about it.
I try to read and understand all the message that peoples sended. I'm very thankfull to them for their help and opinions.As on the header I've Micronta 40003 VLF Discriminator. I took this machine from my fatherinlove some years ago. He used this machine only one or two time in his life. There after I tryed to fin manuel(http://www.geocities.com/treasureport//4003.htm) and try to learn how to use it. Unfortunately when I took this machine I thougt I'll be great treasur hunter, for this reason about 3.000 Km, I turned aroud the area that I leave(Turkey). After all this roads, I just found some bottle tap and metal coins then I understood this machine is not good as I think
. Deeply I search for this machine one more time (http://website.lineone.net/~johngl1/3003.html) and I learned this machine good for only 10 cm deep. Then after I give up to be treasure hunting for a long time, untill to loose my job last summer. Since then, I'm looking for the new machine and technologies. My fovorite machine become exp.5000 ( http://www.schatzsuchermagazin.de/exp5000/exp5000.htm ) , luckly one of my friend bought this machine, I didn't have chance to see untill now but he told me, he found royal tomb at 4,5 metter deep. When I heard this my Treasure Hunting wants started again.I think I'm not able to build a machine like exp.5000 or similar because of their tech. But can I build a machine for 3 metters deep scan? What you propose? Which kind of machine I must build for that. I saw many models scheme from Geotech and other web sites, this made me a bit confuse.
I learned, I must Have one magnometter before detector, are you agree with this?
Can some one tell me how I can modify my Micronta for 2-3 metter deep scan?
best regards
Comment