C.Scope CS1MX Ground balance - how

[pelanj]

I have this detector, and it is quite nice in the dry sand, having only minor false signal. If I move closer to the water, the thing gets crazy.

Is there a way to add a ground balance pot to this detector or is it a non-sense based on how it is made? As always, thanks for any input

[pelanj]

Inland / Beach switch

Hello again - as I am watching the C.Scope line-up - I do not insist on having a ground balance, but there must be some way of adding the beach/inland switch to my CS1 - there should be a place in the circuit to connect a switch. How does the beach/inland switch work on C.Scopes? Big thanks to anyone who can help.

[pelanj]

Inside a CS1MX

Hello, here are a few pictures of my CS1MX circuit board. http://s1203.photobucket.com/albums/bb382/kremator666/

It would be great if someone could post pictures of a C.Scope circuit board with the beach/inland switch to see what it does

[jay]

ground balance

i have the 3mx and i adjusted the noise preset using a piece of ferrite.

[pelanj]

That is some useful info, thanks!