Announcement
Collapse
No announcement yet.
Metal Detector -Upgrade for Greater Depth- 25% to 30%
Collapse
X
-
i'm going to be little brave here , and voice the opinion of my gut ,
have voiced my opinion in the past and didn't "get away with it"
so anyways , here goes , my instant gut feeling is , IT'S A CON
opinion not based on anything scientific , as there isn't any explination there to explain what it is , or even how it works , only that you recieve a few sheets of paper telling you how to do "IT"
so my best guess is , you recieve a few sheets of paper and no real product , the only thing that would have made the add more "sus" would have been the words "instant download".
Comment
-
no , hang on , "poduct" can be posted or emailed , so , thats oficial then , paper is all you recieve. (or an email , your choice)
and another thing , how come item location is in usa but on flebay austrailia ??
and another thing , i use flebay allot , and have NEVER had a "run this add on" pop up appear , and yet on that add when you click on it i have , hum , very sus.
or is it just me.
Comment
-
Originally posted by DOOLEY View Postno , hang on , "poduct" can be posted or emailed , so , thats oficial then , paper is all you recieve. (or an email , your choice)
and another thing , how come item location is in usa but on flebay austrailia ??
and another thing , i use flebay allot , and have NEVER had a "run this add on" pop up appear , and yet on that add when you click on it i have , hum , very sus.
or is it just me.
Cheers
Comment
-
-
This listing appears on eBay UK, too.
I wondered if he was selling instructions showing how to build either a receive pre-amp or a stepup transformer. Such a device could plausibly give some measureable improvement on some lower-end machines, in air-test conditions. If it was a pre-amp, it would have its own battery power, hence the validity of claiming it won't drain the detectors battery.
Comment
-
Originally posted by Skippy View PostThis listing appears on eBay UK, too.
I wondered if he was selling instructions showing how to build either a receive pre-amp or a stepup transformer. Such a device could plausibly give some measureable improvement on some lower-end machines, in air-test conditions. If it was a pre-amp, it would have its own battery power, hence the validity of claiming it won't drain the detectors battery.
He has been selling these on e-bay as well. Maybe there is something to it. I have to try one.
http://metaldetectorsnow.co.uk/4-99-...garrett-etc-2/
Comment
-
The depth increases he's quoting correspond roughly to a 4-fold increase in receiver gain. You could probably get away with that on some machines without signal clipping/saturation, due to an imperfect coil null. But put it near some ground, it would fall over. Not to mention EMI issues.
Comment
Comment