I tested him ( Vallon VMN3CS ) briefly , on average soil .On ,, mineral “ - no problem -passed the procedure ,,ground reject ‘’.But in mode ,, normal’’ reacts very strongly to the soil . Of this mode gives signs , that he will register a pot with coins at 60 centimeters deep in the ground . On the mineral mode has no response on of the same pot . The test was with 15 x30 cm original , standart coil . Aluminum pan- diameter about 30 cm - reaction of about 50 cm in the air . Is there any new software that would allow ground rejection procedure on ,, normal ‘’ ? And allow registration of the above-mentioned pot ?
Announcement
Collapse
No announcement yet.
Vallon VMH3CS Mine Detector
Collapse
X
-
-
Originally posted by Ferric Toes View PostHi Jarrett,
Sorry about the delay in answering, and welcome to this thread. Firstly have a look at pages 465, 672, 707, 769, where you will find some information about audio mods for the Vallon. If you want to run standard low impedance headphones, the transformer mentioned is available on eBay. Any further questions, please ask on this forum thread, or send me a PM.
Eric.
Comment
-
Originally posted by lytle78 View PostI asked Vallon USA rep about this. His thought is that it is a specific feature ordered by the UK MOD - probably in order to zip it together with other parts of their standard soldier load carrying system.
Comment
-
Comment