Vallon VMH3CS Mine Detector

[Altair]

We could make a list of interested people, each one taking responsibility for keeping their word, thus divide the initial price for people number. One people buy the cable, use and then sell it to the next on the list. The new price could be the previous scaled of the calculated quote. Paypal could be used for transactions. At the end, If some other that is not subscribed into the original list would take the cable, He could buy it at half price sending a money rate to everyone in the list. Otherwise the cable could remain at disposal, free of charge, for the people on the list.
Any others proposal?

[kingswood]

The one stumbling block here would be that the upgrade seems to be a download....someone would either have to "borrow" it.
I suspect that a download link is sent after someone pays for the cable and usb. I dont think Vallon would appreciate 50 people emailing them asking for the link

[Altra]

KingJl pointed me to this post on page 37, last post.

http://www.geotech1.com/forums/showt...etector/page37

Graylorie provided this link, that has some interesting files which should be downloaded while public

http://www.vallon.de/pdf/download/

[Carolina]

KingJl pointed me to this post on page 37, last post.

http://www.geotech1.com/forums/showt...etector/page37

Graylorie provided this link, that has some interesting files which should be downloaded while public

http://www.vallon.de/pdf/download/

These are files and programs related to VALLONS data recording and evaluating software for UXO. It is useless without a software USB dongle to unlock the license. I have explained in detail to another member how the download is accomplished which is actually two downloads to get to the final version Eric and I have. I say if you think you would like the newer software version and it would benefit you, well, just pay the price. There may be a easier cheaper way in the near future for some. We shall see.

Best wishes
Carolina

[Altra]

These are files and programs related to VALLONS data recording and evaluating software for UXO. It is useless without a software USB dongle to unlock the license. I have explained in detail to another member how the download is accomplished which is actually two downloads to get to the final version Eric and I have. I say if you think you would like the newer software version and it would benefit you, well, just pay the price. There may be a easier cheaper way in the near future for some. We shall see.

Best wishes
Carolina

Thanks for your insight. I'll watch for developments

[TH'r]

Yesterday I was in contact with iED Detection systems which is the US Rep. for Vallon. I wanted to investigate the possibility of them doing the 1.19 upgrade thus avoiding shipping cost to Germany. I was advised that this upgrade was only for Govt./Mil. and as a civilian it is not available for me. How did you guys manage to get it done?

I have a Vallon with the filter options mentioned by Carolina but have not yet done any real field tests with it. In my opinion, the standard Vallon without the options is a little too fast in that for coins and rings it tunes out too quickly. I would think that settings of 2 or 3 would be better, particularly for the more deeply buried targets. Also, as KingJL states, interference rejection would be better.

Additional coils are available for the Vallon (at huge expense) for UXO searches. These are 30cm and 60cm diameter and the slower response would certainly be better when using these.

I have noticed, that in the 'mineral' setting of the standard Vallon the filtering seems slower. Perhaps KingJL could confirm this.

Eric.

[Carolina]

Yesterday I was in contact with iED Detection systems which is the US Rep. for Vallon. I wanted to investigate the possibility of them doing the 1.19 upgrade thus avoiding shipping cost to Germany. I was advised that this upgrade was only for Govt./Mil. and as a civilian it is not available for me. How did you guys manage to get it done?

TH'r:
I don't think Eric would mind me telling you that I had the upgrade done for him in return for a coil that he wound for me and installed on a lower rod that I fabricated and sent to him. I paid shipping and import fee's and taxes so it was costly for me. On the other hand I have a 12" coil, that works like a charm. My suggestion is the same as above, if you think the update would benefit you I would pay the price. The cost plus a $200 or $300 machine is still much cheaper than any other PI of this caliber. Another issue no one is talking about, is while doing the update it only makes sense to have VALLON do a vacuum test and replace old seals and dehydration capsules. Why limit yourself when most gold I find is waist to chest deep. Just a thought.

Carolina

[Rocketdemon]

Well I have made an appointment with Vallon and paid for the firmware upgrade, I will arrive at their reception in Eningen the morning of Tuesday 10th July.

I 'll try and obtain as much info about the cable/firmware as possible, and be cheeky and ask for a tour of the facility, if you don't ask you don't get!

If anyone in the UK wants anything picking up PM me.

[TH'r]

Recieved another E-mail from the US Vallon Rep. For $125 + shipping both ways to their US facility they will provide a "Civilian Upgrade 3.16". Basic cleaning, repair, seals, and firmware upgrade. I have inquired as to just what the firmware upgrades are and will post them here.

TH'r:
I don't think Eric would mind me telling you that I had the upgrade done for him in return for a coil that he wound for me and installed on a lower rod that I fabricated and sent to him. I paid shipping and import fee's and taxes so it was costly for me. On the other hand I have a 12" coil, that works like a charm. My suggestion is the same as above, if you think the update would benefit you I would pay the price. The cost plus a $200 or $300 machine is still much cheaper than any other PI of this caliber. Another issue no one is talking about, is while doing the update it only makes sense to have VALLON do a vacuum test and replace old seals and dehydration capsules. Why limit yourself when most gold I find is waist to chest deep. Just a thought.

Carolina

[6666]

Well I have made an appointment with Vallon and paid for the firmware upgrade, I will arrive at their reception in Eningen the morning of Tuesday 10th July.

I 'll try and obtain as much info about the cable/firmware as possible, and be cheeky and ask for a tour of the facility, if you don't ask you don't get!

If anyone in the UK wants anything picking up PM me.

I would email them now and ask for a tour dont wait until you arrive, give them some time to think about it.

[Rocketdemon]

I would email them now and ask for a tour dont wait until you arrive, give them some time to think about it.

I must say Vallon is a very helpful and accommodating company, I did email them asking for a tour of their facility while I was there and they have agreed to do so!

[TH'r]

Vallon advises that this upgrade will be to the 1.19 manual. I am going to send in both of my 1.14 Vallons & will post how this works out.

[ionut_mtb]

Vallon advises that this upgrade will be to the 1.19 manual. I am going to send in both of my 1.14 Vallons & will post how this works out.

What benefit you will get from this upgrade?

[TH'r]

What benefit you will get from this upgrade?

I have the firmware 1.14 & 1.19 manuals which are available for download. Apparently, there is also a firmware 2 UK MOD version which would explain why the British Vallons operate somewhat differently from as described in the 1.14 manual. The firmware 1.19 differences are quite extensive to discuss in their entirety. I suggest you obtain a 1.19 manual so you can evaluate them for yourself. I am not positive that the 3.16 will get me all of them, (I was only told that the manual version would be 1.19) but I will let everyone know when I get my two detectors back.

[Carolina]

I will attempt to clarify some of these issues below.

Carolina