2nd Chance PI

[dantech]

@mhak1
No , I personally use some PCB designed for Chance 1. Simply, 2nd Chance had the begin from Chance 1

@macross
In my opinion every mensioned above PI is static

SurfPI
http://silverdog.co.uk/shop2/library/schematic1_2.JPG

Pickini
https://www.youtube.com/watch?v=Me5QFDXo-II

BarracudaPI
http://silverdog.co.uk/shop2/library...aSchematic.pdf

And here are movies - proofs:
http://www.silverdog.co.uk/shop2/web/index.html


So, everyone can state everything but it do not have to be the truth

[walkman]

Hello friends
My best friend mustafa, made chance rev2.
With his new design pcb.
I add the pcb pictures he made and the video he shoots.
Good looking

https://www.youtube.com/watch?v=AdzgmCRVShM

[dantech]

I have seen your movie and I find you have some troubles with the coil. Measured delay should be several us but not 99us

[6666]

Does anybody know if the 220uH choke keeps much noise out of the circuit ? is it really effective ?

[saber]

Good job mustafa

I have problem with fuse bits in atmega328 last hex (v021)

Can you show me how to set fuse bits in ponyprog?

Thanks

[walkman]

saber;

I add all fuse bit document in the zip.

Regards

[saber]

Thanks

I have those pics but i dont understanding

I need fusebits in ponyprog and i dont have those pics software

Can you show me how to set fusebits on ponyprog?

Regards

[selim]

Ponyprog fuses settings,
Only these will be marked.

- CKSEL3
- BOOTSZ1
- BOOTSZ0

[kt315]

[saber]

Hi kt315

Is this for atmega328?

[kt315]

what version of chance you do???http://www.md4u.ru/viewtopic.php?f=5&t=10429

[saber]

what version of chance you do???http://www.md4u.ru/viewtopic.php?f=5&t=10429

2nd chance (021 version) with atmega328 on this picture:

http://www.geotech1.com/forums/attac...3&d=1489088923

[kt315]

why you are not able open first post and click there on link?


http://chomikuj.pl/dantech/2nd+ChancePI/Fusebits

[saber]

Thanks. Its work.

[dantech]

v022 is released