Pulse Star II (first analog version)

[Orbit]

I will discover one thing when you all copy the mother pcb and Pcb discrimination and put everything together it will not work at all or it will work but never like the original, the secret is in the epoxy resin on the mother pcb. When you remove the resin, you also remove the protection!You will notice that when you press reset, the scale of the empty battery indicator will not go all the way, otherwise, even though it works, if you do not turn on the coil, it will beep non-stop, so without the coil, the device beeps! Those are two things that indicate something is wrong. There are two or three tricks hidden in the epoxy..

[ivconic]

the person... Orbit, give the permission Ivconic. it seems you hope to live 300 years like Imperor of The Galaxy Mister Putin
NOT! your life is so shortest you will bear your permissions in the ground.
BTW i asked Eric to write a book two times - he answered me smiling in a very sharp manner. WHERE IS ERIC NOW??? answer yourself.

KT315 you don't seem to understand what the word means?
If someone does you a friendly favor and gives you something on the condition that you do not spread it further; and you accept that condition... what else is not clear to you?
Anarchy leads nowhere. People are attached to words and oxen to their horns!
Are you a man or an ox KT315?

[ivconic]

By the way... I don't know if you knew, KT315; but there is also PS3!
4 layer pcb, many upgrades etc.
Save and prepare money!
Soon you will be able to buy it on Aliexpress, Alibaba, Taobao...

[ZOUjiarui]

Why doesn't anyone make a pulse g, it has full schematics and pcb available, just needs some effort, pulsar is a commercial device, no one will share it for free

[ivconic]

Why doesn't anyone make a pulse g, it has full schematics and pcb available, just needs some effort, pulsar is a commercial device, no one will share it for free

What is "pulse g" ?

[algan]

I don't like how the pulse star 2 power supply is made, other variants should be tested and maybe it will be better than the original.

[milad.mohammadi13131]

these pic that star posted are for me.
i was abale to copy the pulse star 2.
i asked for help here but no one helped me.....

[milad.mohammadi13131]

pulse

[aft_72005]

Are you have picture from PCB another side ?

[ZOUjiarui]

What is "pulse g" ?

pulse star g

[aft_72005]

According to my studies, the German Pulse Star circuit is somewhat similar to Pulse Star G.
The German Pulse Star does not have a good discrimination.

[aft_72005]

Why doesn't anyone make a pulse g, it has full schematics and pcb available, just needs some effort, pulsar is a commercial device, no one will share it for free

I checked the pages of the Bulgarian Pulse Star in this forum some changes have been made in it, but it has not been determined in the end.
It is a research project.
did you make it? If you have the information, feel free to apply.

[Ruben2000]

I hope for help from friends on this topic.

[Ruben2000]

I hope to make an analog pulse induction detector.

[ZOUjiarui]

There is no such thing as a free lunch