If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have been using detectors sporadically for 3 years, but Delta is the deepest. I read a bit of different forums about Delta and its various versions. I also looked at this forum and I like it in simple versions where there are few knobs and that's why the 3s outside / insaid version appealed to me visually. That is why I was interested in areas of specific subjects. My Delta on a 1x1m frame catches a 20l canister with about 250cm, apparently this range can be increased. Solder a little bit. I made a few coils for my Delta
I do not want to advertise anything. The topic about delta is writing in it. Delta is deeper than Gerber or Jabla, and I liked the simple version very much. I do not have a hex file. I did not construct my delta and I bought it. Now I would like to build my first detector. I liked the outside / inside version. This version of lcd does not want. I have old-fashioned tastes and I like simplicity. That is why I would be very grateful for your help.
I'm not looking for gold. A small chance to find. I have other equipment to look for shallow. I'm interested in steel and deep objects. I will do earthworks and a good, easy-to-use frame detector that would be useful to me. The deeper the better. Maybe other than Delta only deep with frame 1x1m or a little bigger with specific examples of range.
ok. i have last board i wanted to leave but i can sell. if you want 'free' turkish board remember i do not consultate on aliens' pcb and what
there they perpetraded, do not have a time to dig and seek up their mistakes.
Sold I can do a little, but I do not know much about electronics. Would I be willing to buy a plate only what ranges and what price? For now, I have the dbp2010 deletion and I am looking for something a bit deeper. In another forum, one user inserted tables with ranges that would suit me very much, but this person on that forum happens once in a few weeks and has not written back yet. I also had plans to buy another detector, but they are no longer on sale. Concrete is about https://www.youtube.com/watch?v=nSoyq8zmGS0&t=2s
me and Andi want more depth on 1g of gold. 70cm. ok we can tune DP on this work.
tune FIRST DELAY to its minimal 15us. change R7 to 820-910pF. R7 to 7.5k. decrease R8 and C5 to decrease a STROBES' WIDTH to 20-25us.
Please Explain
change R7 to 820-910pF ????????
decrease R8 and C5 to decrease a STROBES' WIDTH to 20-25us. Give me values Please
Thanks
Please Explain
change R7 to 820-910pF ????????
decrease R8 and C5 to decrease a STROBES' WIDTH to 20-25us. Give me values Please
Thanks
guys
that was THE ORDER from a customer to transform DP for seeking gold nuggets (for small coil detection).
so it is NOT hard for me to remake the deeper in nondeeper.
guys
that was THE ORDER from a customer to transform DP for seeking gold nuggets (for small coil detection).
so it is NOT hard for me to remake the deeper in nondeeper.
Здравствуйте КТ315.
Английски не знаю.
Хотел я Вам в личико написать, но почему то не рашрешает.
Как с Вами контактоваться, где написать?
Спасибо.
Comment