Delta Pulse

[kt315]

does it detect Gold (30*30*1cm) at depth 3 meter?

if you dig the hole with depth 3 meter and have the gold I am ready to make the test.

[ahmad]

if you dig the hole with depth 3 meter and have the gold I am ready to make the test.

))
so whats the tested depth until this day?

[WM6]

does it detect Gold (30*30*1cm) at depth 3 meter?

No.

[VUJO]

The question for the kt 315

Why are the capacitors C16 and C25, which are the integrator circuit of such a large raster? Does this mean that the high operating voltage?

[kt315]

Why are the capacitors C16 and C25, which are the integrator circuit of such a large raster? Does this mean that the high operating voltage?

because they are being used in the SAT (self auto tuning) stage and have to have ESR low loss. yes, they are hight voltage - 150-250V. no, this does not mean.

[VUJO]

because they are being used in the SAT (self auto tuning) stage and have to have ESR low loss. yes, they are hight voltage - 150-250V. no, this does not mean.

thanks kt315 for your answer

[Nicolas]

I need help

Hi All

Dear kt315 and someone

I need help for PCB layout and shema for this type of detector

[szucs_g]

LCD problem

It LCD at me 25,5V shows. He was good till now. I don't understand. What may be his trouble? Can you help me?
Thank you

[jap]

It LCD at me 25,5V shows. He was good till now. I don't understand. What may be his trouble? Can you help me?
Thank you

Clear of the value of voltage is twice multiplier - there is a mistake in the value of resistor compiled in pcb of LCD.
best time
j.

[szucs_g]

Clear of the value of voltage is twice multiplier - there is a mistake in the value of resistor compiled in pcb of LCD.
best time
j.

And if the PIC is corrupt?

[jap]

And if the PIC is corrupt?

-The PIC works or not works.
- If the PIC is corrupt,, Reprogramming the HEX file.
best time
j.

[Nicolas]

Hi jap you can help me

for the connection of the LCD

I send you the PCB and

LCD shema

thx

[Nicolas]

Hi jap

I found this image it can help you

but I not understand

please everybody can help me

[szucs_g]

-The PIC works or not works.
- If the PIC is corrupt,, Reprogramming the HEX file.
best time
j.

I have reprogrammed but dont work well. The 10k pot must I adjusting for correct volts above the pic?

The statusbar move very rapidly to. :-( I dont know what happened it.

All connection is right (A,B,C,D,E) and this until time right working...

[szucs_g]

Hi jap

I found this image it can help you

but I not understand

please everybody can help me

Look at this...