Delta Pulse

[Geo]

Hi Batman. I attach you the manual for Bandito-Impulse. It is the same detector with Delta Pulse.

[aft_72005]

Singel layer pcb for delta pulse

[aft_72005]

Geo 1. I never saw a one side pcb for DeltaPulse.

nelson You are right Geo. My pcb is a one side with lots of jumpers on it to configure the original board, but it must be some errors on connectios

Hi
Singel layer PCB for sniffer xr71 and delta pulse.

[erolunall]

hello aft

where is the paths?

[nelson]

Hi aft_72005.
Nice work
Did you tested this pcb?
Mine is a one side pcb, but with lots of jumpers.
Can you share pcb files to check it?
What pcb software you use to get the one side pcb?
I have sprint layout 5.0
Other softwares like eagle, orcad, proteus are here too, but i m just trying to learn how to use it.

Waiting for your response.

Best regards
Nelson

Hi
Singel layer PCB for sniffer xr71 and delta pulse.

[erolunall]

elbombacı design of delta pulse single sided

[erolunall]

http://www.teknolojiekibi.com/yeni/i...ic=4.msg6#msg6

elbombacı designed

http://www.savefile.com/files/1018088

[aft_72005]

Hi Nelson
No, I don’t test yet .because it completed later.
Drew it with sprint layout 4 .can you send me
Your drawing?
I am seem you, have eagle, orcad,proteus also
Protel .I am working with protel and sp4 and sp5.
Me email: [email protected]
Regards.

[aft_72005]

Hi erolunall
Had differences between my drawing and elbombaci.

[nelson]

Hi my friend.
No i don´t have the file. I just did the original doble side pcb with lots of jumpers.
Now i m tring to draw on sprint layout 5, a pcb for Anker 60.
Do you have Delta Pulse one side on sprint layout file to share it?
Regards
Nelson

Hi Nelson
No, I don’t test yet .because it completed later.
Drew it with sprint layout 4 .can you send me
Your drawing?
I am seem you, have eagle, orcad,proteus also
Protel .I am working with protel and sp4 and sp5.
Me email: [email protected]
Regards.

[aft_72005]

Hi Nelson
Please let me check my drawing.
If it is ok, then send for you.
Regards .

[Unregistered]

HELP ME PLEASE

HI GEO I AM FROM IRAN.
I NEED Component List DELTA PULSE.
I DONT KNOW NUMBER:
RESISTORS = ? WATT AND HOW %?
CAPACITORS :
C7 220UF = ??V
c8 10uf = ??V
c12 100uf = ??v
c21 10 uf = ??v
c27 220uf =??v
and c29 100 uf = ?v
thanks alot for help.
[email protected]

[Unregistered]

I AM SORRY FRO USE YOUR NAME

HI all.
i am sorry fro use your name UNREGISTERED!!!!!!!!!!!
I AM FROM IRAN!!!!!!!!!???????
I NEED Component List DELTA PULSE.
I DONT KNOW NUMBERS:
RESISTORS = ??? WATT AND HOW %???
CAPACITORS :
C7 220UF = ??V
c8 10uf = ??V
c12 100uf = ??v
c21 10 uf = ??v
c27 220uf =??v
and c29 100 uf = ?v
send my mail
thanks alot for help.
[email protected]

[Geo]

HI GEO I AM FROM IRAN.
I NEED Component List DELTA PULSE.
I DONT KNOW NUMBER:
RESISTORS = ? WATT AND HOW %? 1/4watt........ 1...5%
CAPACITORS :
C7 220UF = ??V All capacitors at 16V minimum
c8 10uf = ??V
c12 100uf = ??v
c21 10 uf = ??v
c27 220uf =??v
and c29 100 uf = ?v
thanks alot for help.
[email protected]

Hi.
Good luck

[aft_72005]

HELP ME PLEASE
HI GEO I AM FROM IRAN.
I NEED Component List DELTA PULSE.
I DONT KNOW NUMBER:
RESISTORS = ? WATT AND HOW %?
CAPACITORS :
C7 220UF = ??V
c8 10uf = ??V
c12 100uf = ??v
c21 10 uf = ??v
c27 220uf =??v
and c29 100 uf = ?v
thanks alot for help.
[email protected]

Hi
Seem as you are beginner , and for you better begin with simple pulse
Induction .
Regards.