Bulgarian 'PULSE STAR' (... close to Legendary one)

[kt315]

in principle. the first is WRONG the pin at lm 2940.
[ATTACH]30012[/ATTACH]

your fatal mistake is you connect Output and Input of the 2940 on power supply. your 2940 will give off the magic smoke living in electronics.

[scs]

PI detector with mono coil -correct discrimination for silver is not possible.

[fengzhai01]

I can assure you that my this drawing is correct, because I was being used, or you didn't notice the zener diode has a 5.6V LM7905 below, it is because of the diode, the negative 5V into negative 10.6V

[g.s]

yes did not notice ..thanks for resolve the issue fengzai01 5 + 5,6v zener = 10,6 ok

[g.s]

kt 315 wAS WRONG What I wrote for 2940 certainly would make a nice boom

[georgi.g.zhelev]

The scheme is 100% correct !!!
http://i016.radikal.ru/1405/b0/2f4314822d98.jpg

[kt315]

kt 315 wAS WRONG What I wrote for 2940 certainly would make a nice boom

seems your name is due Eric Foster.
get out a fat glass from your nose and look

[fengzhai01]

The drawings I have some ideas that, if you use LM7910, then you output voltage 10.6V or 10V only, 10V only about 9.4 volts, this is the first question, the second question is a 7660 boost part is wrong, the third one is the U3 fourteenth adjustable foot is wrong connection, please see U2

[WM6]

We need to know first how battery is here oriented.
Where is + an where is - ? Georgi?
There are different use of + - battery sign in schematics drawing.

Which one is correct, this: - -|i|i-+ or this: + -|i|i- - ? According C10 + is at bottom.




What is (+-) marking convention - look at praxis:

[fengzhai01]

The plan is entirely correct, this circuit is based on +12V GND

[georgi.g.zhelev]

http://s020.radikal.ru/i723/1405/60/ae7fef0a4abf.jpg

LM 2940 /12V

[g.s]

it lm2940 look at the schematic that has the force 5 amp ??????

what is the meaning of the word womku ??

[WM6]

what is the meaning of the word womku ??

It is Schottky in Cyrilic.

[g.s]

Thank you wm6

[qhdzw]