Tweet
hey with correct schematic you will do correct detector BEFORE me. then you will give gerbers overwhere around and every man in world can repeat it while i wasted much time to get the info. my job is not being appreciated???? your cunning fox.
-
-
My dear master, you have made me feel extremely embarrassed. I will refer to the drawings of X5 and 8AT to try to make itComment
-
i bought King Cobra before to do the schematic. shipping cost from USA was huge, but the detector was with a problem. not so lowest price but...
so my dear friend you may buy DEEPER and draw the sch. not so much price. then you can sell bare boards and to try get the money back.
from every pcb you will get USD5-7 allowance. 10 pcs will give you sure USD70 back. you also can sell completed detector, that will give you USD200-500 back.
simplest ariphmetics. then you will share out to people - checked schematic, a manual How-To-Build-Detector, o-scope signals in every TP etc.Comment
-
So, can I purchase the correct blueprint from you about 10DDComment
-
you have full right to use my files and do own layout. no limits.Comment
-
My master, do you want me to customize PCB boards for you from China? If that's the case, I would be happy to do so
Comment
-
The schematic has multiple errors, forcing work to pauseComment
-
I encountered some difficulties during the production process without any prompts. Perhaps the masters on the forum have a solutionComment
-
The circuit is not working properlyComment
-
main rule here is same. to build right detector you have to buy right board, get right Part List and right schematic, manual How-to-do.
to take something from the forum, unchecked, untested, to build something is big mistake. you can't cook fish soup from pig ears.Comment
-
A deeper 8 would probably be easier. No need to waste money, the machine isn't much betterComment
-
Due to a schematic error, I had to stop making DD10. It may take me a long time to fix it because I am a beginner
Comment
Comment