Announcement

Collapse
No announcement yet.

Compass schematics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Compass schematics

    I have decided to post some Compass schematics many of which are courtesy of Bill Hays. Some of the schematics I post may have been posted before, but I am trying to put as many as possible all in the same thread.

    Regcompass 84b maybe.pdfcompass 94b maybe.pdfcoin hustler 2.pdfRelic Magnum 6.pdfJudge 2 schematic.pdf

    Reg

  • #2
    Here is a different coin hustler schematic. I suspect the IC used is a CA3094. Also I added a couple more. Again, some may have been posted before.

    Reg
    Attached Files

    Comment


    • #3
      Good Stuff.


      Any thing on the 94B ???

      Comment


      • #4
        Originally posted by homefire View Post
        Good Stuff.


        Any thing on the 94B ???
        Look at the first post, it's there.

        Comment


        • #5
          Found another schematic that may be the 94b. Here it is.

          Reg
          Attached Files

          Comment


          • #6
            Thank You Sir!

            Your Da Man!

            Someone gave me a 94B and it has tooning issues.

            It's the first one none auto tune. Only one IC.

            Not Much to them.

            Runing at 100 KHz there not at all hot on Iron Bits and would be a good Ghoste Towner.

            Comment


            • #7
              Don't know if this will help but here is some more info on the detector you mentioned. I don't know if it is accurate or not so keep this in mind.

              Reg
              Attached Files

              Comment


              • #8
                There is a couple mistakes in my XP-350 schematic. It should be connected to ground at pin 3 of U7 and the other side of the 2.2k resistor connects to pin 12 of U5 instead of where it is. The 82k resistors at the offset adjustments connect to the right side of the .22uf caps instead of the left side.

                Comment


                • #9
                  David B. I wanted to thank you again for that schematic. I believe people should share information on obsolete detectors rather than hoard it for themselves. Hopefully, more people will add schematics of other Compass detectors, rather than be selfish.

                  Thanks again, David B.

                  Reg

                  Comment


                  • #10
                    I found another schematic. Here it is. Anyone know which Compass this is? I am thinking it might be the Judge 1.

                    Reg
                    Attached Files

                    Comment

                    Working...
                    X