Compass 94B Repair

[Imaybail]

I have a 94B I inherited from my Dad and am trying to get it working again.
Two wires have broken loose from the coil connector inside the control box.
The wires that are still on the connector are green, blue, and black in a clockwise order.
The two loose wires are orange and grey. I need to know the order to attach these wire to the remaining lugs on the connector.
thanks, and happy hunting!
Ben

[mikebg]

Ben, See the second attachment to post #1 and the whole thread:
http://www.geotech1.com/forums/showt...095#post162095

[kt315]

Ben, give pls photos of your PCB what you mean. I will look in my archive of files.

[Melbeta]

The compass forum where you posted this question, all you need to do is search for the answer there, as it has been covered many times there, enter Melbeta Compass 94b and read all links

http://compass-metal-detector-forum....ta+Compass+94b

[Imaybail]

Ben, See the second attachment to post #1 and the whole thread:
http://www.geotech1.com/forums/showt...095#post162095

Thanks for the reply. I found the schematic but didn't see any legend about where the wires attach to the connector.
by trial and error, I was able to get it fixed and working today.
Ben

[kt315]

Ben photo is too blur for me (((

[Imaybail]

I got it figured out. Green, blue, black, grey, and orange.