First of all I apologize for the wording but I'm using the google translator since I'm from Argentina and do not want to make the English :/ hammerhead project I found hanging around the net but do not know which plates to use, there is a that is rev D and other is Rev C
Through-hole PCB Gerber files (ZIP 180K) - Rev D
Through-hole PCB Layout (2x) (246K GIF, 600dpi) - Rev C
http://www.geotech1.com/cgi-bin/page...head/index.dat
pcb which I use
the c seems simpler working properly or there is q make some modification, from and appreciate your answers and again I apologize for any errors that may generate the google translator
Through-hole PCB Gerber files (ZIP 180K) - Rev D
Through-hole PCB Layout (2x) (246K GIF, 600dpi) - Rev C
http://www.geotech1.com/cgi-bin/page...head/index.dat
pcb which I use
the c seems simpler working properly or there is q make some modification, from and appreciate your answers and again I apologize for any errors that may generate the google translator
Comment