Announcement

Collapse
No announcement yet.

'KROT2-XM' (mole), new project Xmega32

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello everyone can anyone tell me if this lcd will work with a krot 2 xm (cbc016002c00-00) I think I got it from a dab radio
    Click image for larger version

Name:	image.jpg
Views:	1
Size:	16.1 KB
ID:	347559
    thank you regards
    Dean

    Comment


    • Hard to say. Bad the character set.

      Comment


      • Hello ujosvec
        thank you
        I thought it is a good quality lcd.
        But maybe I have a play with it on my Arduino
        thank you
        regards Dean

        Comment


        • No, thats it. So, You must review electronic.

          Comment


          • Hello cvele
            thank you
            no problem
            where is good place to buy the lcd from ?
            thank you
            regards dean

            Comment


            • I have received chip atxmega32A4. Now I need paantalla lcd.

              Is this one correct?


              http://m.ebay.com/itm/DC-5V-HD44780-...255?nav=SEARCH

              Comment


              • Hi,
                This LCD seems correct.
                All HD44780 controlled lcd 5v will fit.
                The LCD is powered with 3.3v and the contrast is fed with a negative power by the charge pump.
                Good luck

                Comment


                • Is this one advisable different 3v3v?

                  http://m.ebay.com/itm/DC-3-3V-HD4478...688?nav=SEARCH

                  Comment


                  • As i said before, the previous lcd was ok.
                    You don't need a specific 3.3v lcd. Every 5v ones will fit

                    Comment


                    • Ok, thank you. I am going to buy just now

                      Comment


                      • Originally posted by Virdi_248 View Post
                        Is this one advisable different 3v3v?

                        http://m.ebay.com/itm/DC-3-3V-HD4478...688?nav=SEARCH
                        The sun is not visible!!! Big inertia!!!
                        unsuitable for KPOT!!!
                        I tested.

                        Comment


                        • for krot all are suitable. not so advanced device to be in prostration what to do from.

                          Comment


                          • Originally posted by kt315 View Post
                            for krot all are suitable. not so advanced device to be in prostration what to do from.

                            Comment


                            • I have seen a video in internet that some one make a new pcb without mc34119 and its work just fine

                              Here :
                              https://m.youtube.com/watch?v=5cBmyB8JhUc

                              Please help me for made a new schomatic for this ib without mc34119

                              Thanks

                              Comment


                              • Originally posted by saber View Post
                                I have seen a video in internet that some one make a new pcb without mc34119 and its work just fine

                                Here :
                                https://m.youtube.com/watch?v=5cBmyB8JhUc

                                Please help me for made a new schomatic for this ib without mc34119

                                Thanks
                                The video is MC34119

                                Comment

                                Working...
                                X