Fisher CZ-6 schematic wanted.

[yoda]

Hi;

I have a sick CZ-6 here and was wondering if anyone could provide a schematic. I have found links throughout the forum, but the links are dead.

Thanks
Ed

[porkluvr]

There may be enough here to help troubleshoot. Good luck.

[yoda]

Hey, thanks for those. Hopefully these will at least guide me. Problem is, the CZ-6 works but all of the disc points are off. I'm going to check the obvious first - checking if the TX frequencies are on. The other problem is, I purchased it used, years ago, and forgot about it. By the time I got to it, it was too late to do anything about it. For all I know, someone may have gotten into it and started turning things. Calibration seems to be some kind of closely guarded black magic. I really wish fisher would release a calibration procedure.

Ed

[kt315]

well well well... gotta quit requests from new mine friends... following to longer way in dark fog.

[yoda]

Thanks for the layout, kt. Much appreciated. --Ed