Tweet
I picked up a nonworking Bounty Hunter Tracker ID 505 for cheap
and plan to use the coil on a project. I thought I'd post some info
here for reference.
The coil is a 7" with 2.67 mh TX (and Cap in parallel) and 8.67 mh RX.
Here's some pictures of the board;
and plan to use the coil on a project. I thought I'd post some info
here for reference.
The coil is a 7" with 2.67 mh TX (and Cap in parallel) and 8.67 mh RX.
Here's some pictures of the board;