All about delta pulse 2 with LCD discrimination

[hichemishic]

Hi , to all members as we all know that delta pulse 3 is not stable and bad results for slamm targets , delta pulse 3s stable but only for sell so the best way is the developped delta pulse 2 with latest stable program of lcd for discrimination so i posted in attachements all schematics about delta pulse 2 with lcd discrimination and latest reversions
i will post all my knowledge !

1- for the discrimination this program is stable and latest from http://www.teknolojiekibi.com/yeni/i...p?topic=3782.0 to proram the pic PIC18F252 you should use the software attached and the file disc.hex attached and follow as on image attached too and of course you should have the device . (For vista/7 users Right click => Run as Admiistrator)
2- to attach the lcd with the delta pulse 2 pcb just shunt "P1,P2,P3,P4,P5,P9" from lcd pcb to "P1,P2,P3,P4,P5,P9" delta pulse pcb attached too on attachements.
3-TR1 TR2 are Potentiometers of 10K on the lcd pcb and they should be turned on middle then you should press the tune to reset and you should see one level of the bar on the lcd then waiting then press again the reset button to refresh the lcd display

please any one can correct me or add other points will be appriciated
delta_2_2010_lcd_discrimination.rar
thanks

[AurumKid]

disc.hex

do you have the full version of hex file for this PI?

[hichemishic]

@AurmKid the full version does not matter , it can be cracked to 1024 times or 2048 times instead of 200 i will post that soon , this limilation is only for non-commercial building ( Amateur Customer can not disassemble the machine and re-program the pic PIC18F252) but members here can do it even with 200 on/off limitation just unplug the pic , erase , re-program , and plug it again

Any other help please ?

[AurumKid]

I have disc.hex cracked 1024 from freedan3d. is it possible to use other pic micro?

[hichemishic]

no , First the cracked hex from freedan3d works with lcd of 20*40 and it is not stable , the one i posted with attachement is the latest and the most stable for discrimination and as i sad 200 on/off is not a problem for electronic developper and 200 on/off can take much time to attempt 200 time

K3rnel31

[RS_Phil]

Can you give us some hint how to do that?

[hichemishic]

to do what?

[AurumKid]

Thank You K3rnel31.

Do you have air test video and photos of your latest DP Pi?

[RS_Phil]

I mean for the hex of delta(post #5), I think this is a best solution for demo hex like DP2+.

[hichemishic]

to all member , i have updated my knowledge about this project and i posted more details here :

http://www.thunting.com/smf/pi_desig...-t57865.0.html

[RS_Phil]

to all member , i have updated my knowledge about this project and i posted more details here :

www.thunting.com/smf/pi_designs_deepseekers/all_about_delta_pulse_2_with_lcd_discrimination-t57865.0.html

Nice, but my problem is only the demo hex file(increase the user setting) also in photo bellow the hex they use are not for PIC18F252 and PIC also. see photo below