Fortune-M

[scrungy_doolittle]

The best tip in a long while, thanks. I was looking for "energy bank" battery packs before, but they are rubbish since they employ very noisy switching regulator. These contain only batteries, and no noisy regulator.

http://www.ebay.com/itm/8-4V-10000mA...3D141474802528

[bernte_one]

where we can get pcb and pre-programmed Controller within europe? or presoldered pcb

[Toros]

where we can get pcb and pre-programmed Controller within europe? or presoldered pcb

Here is all info: http://alltech.at.ua/forum/3

[Hannu]

Is there good substitute for tlv2372?

[kt315]

http://alltech.at.ua/forum/3-10-1
sad to say there is much of pages in the forum - 159 - to search. bars did not give this info in part list.

[kt315]

where we can get pcb and pre-programmed Controller within europe? or presoldered pcb

i see ozzy-sv alias sells it https://reibert.info/threads/plata-m.../#post-6556203
if you are not able to open the link i can do screenshots.

[kt315]

....

[bernte_one]

thanks for this info

[scarface]

-maybe it help.i think this the guy who builb first project (coxa/fortune)
https://www.youtube.com/user/barssimf/videos

[kt315]

speedy googletranslated.

Selling board MD Fortume-M ver 0.3
Features:

• stabilizers choice: LD1117 or LM2940
• parallel mosfet protection diode is added to reduce losses.
• Under the housing Z80.
• "Rectified" socket programming, no need to cross the wires from PicKit3
• Input capacitor smd cause interference with fur. replaced by WIMA MKS2 impact or the like
• The ability (who need) installation DC-DC converter on LM2731X to power a lithium-ion battery. (Work DC-DC converter has not yet been extensively tested)

The board tested, no errors.
Here's a sample collected without a DC-DC converter.

Description Offline author http://alltech.at.ua/forum/3-10-1

Price 8 USD (to 04.04 - 200 UAH) for Ukraine + Your shipping.
For other countries 13 USD including shipping.
Who with soldered processor and programmed + 6 USD

Verkauf von Bord MD Fortume-M ver 0.3
Eigenschaften:

• Stabilisatoren Wahl: LD1117 oder LM2940
• parallel MOSFET-Schutzdiode wird hinzugefügt, um Verluste zu reduzieren.
• Unter dem Gehäuse Z80.
• "Gleichgerichtete" Socket-Programmierung, keine Notwendigkeit, die Drähte von PICKIT3 überqueren
• Eingangskondensator smd Ursache Interferenzen mit Fell. von WIMA MKS2 Stoß oder dergleichen ersetzt
• Die Möglichkeit (der Notwendigkeit) Installation DC-DC-Wandler auf LM2731X einen Lithium-Ionen-Batterieleistung. (Work DC-DC-Wandler noch nicht ausgiebig getestet)

Das Board getestet, keine Fehler.
Hier ist ein Beispiel ohne einen DC-DC-Wandler gesammelt.

Beschreibung Offline Nutzer http://alltech.at.ua/forum/3-10-1

Preis 8 USD (bis 04.04 - 200 UAH) für die Ukraine + Ihre Versandkosten.
Für andere Länder 13 USD inklusive Versand.
Wer mit gelöteten Prozessor und programmiert + 6 USD

[bernte_one]

hello kt315

did you have the e-mail contact from seller?

[kt315]

hello kt315

did you have the e-mail contact from seller?

BOOM. is the written e-mail address as silked mask at the board (pics above I putted) so unfair?
additionally will ask him although.

[kt315]

ozzy did reply his email address at board is effective. a payment via paypal will be more on 1,33 times just cause the fee.

[bernte_one]

yes you are right, have seen this before but wasn´t sure if it is from author or from pcb manufacturer

[TreasureHunter]

Hello everyone!

How is this project going? What are the latest improvements?

TH