Schematic Cscope detector

[Mrand]

I look for old C-scope metal detector type "VLF-TR 750-D" (for reactivation and service use).
Mrand

[Geo]

I look for old C-scope metal detector type "VLF-TR 750-D" (for reactivation and service use).
Mrand

Hi Mrand.
Tr750-D and 950-D are very similar....
Do you interesting for a reverse enginearing schematic of 950-D?

Regards

[Mrand]

I'm interested a schematic of the any form, because I must repair the detector for my old friend.

[Geo]

Check your email...

[ljuba]

[kt315]

again guys I URGENTLY AND URGENTLY ask you do the images more legible.

please do these step by step!

1. wait clear sunday time. the sun must be VERY OPEN!
2. GO OUT from your home, at your homeyard, at the sunlight.
3. place PCB so the sun light will be from left upper PCB corner.
4. the shadows must be short, but they must be!
5. do a photoshooting.
6. you have NOT EVEN A TINY CHANCE here to get the answer if you are doing your Home Work poorly and woorse.
7. set your camera on high resolution. your pics has to be from 5MB and more.
8. send your pics to [email protected] with subject in subject field:
new hires pics of board [detector model name] for your collection.
9. Forget your egoistic intentions only take on and give nothing in return.
do not cultivate your EGO here.


GOOD LUCK IN THIS YOUR NEW HOBBY.

[ivconic]

I look for old C-scope metal detector type "VLF-TR 750-D" (for reactivation and service use).
Mrand

Me too.
I would like to get something from it, schematic, pictures, closeups, some tech specs etc.
A friend is offering me only a coil from it, in good shape.
So i would like to learn more on that detector and to see if i can use the coil for something, some diy etc.

[ivconic]

A friend measured the coil;
- 0.54mH
- 1.99mH
and seems both coils are connected together at some point, since he can also measure 2.54mH at some pins too.