Deepers Detector

[LDTVN]

MFC don't worry, it was told to me.
kt315
1. I have not come to the forum for a long time and have not seen your request.2. Remember what you told me when I asked you oscilloscope and potentiometer ratings? And I'll ask you: why do you need CAD' files? Especially from pipetzh lenivogo?
I spent my time drawing a diagram based on the materials you provided and put them on the forum.Why do you need CAD' files for? They are not yet final. And most forum users will use them to assign itself the work done by me...
And for my work, kt315 and dbanner was now called me a mouse and a rat. Thank you very much for your opinion. And you think after that I would like to teach CAD' files for you??? Not sure.

[dbanner]

I never called anyone in particular a rat, so my deepest apologies to you or anyone who feel offended. A lot of people come on forum requesting all sorts of information, but when asked to share, they don't. I don't have problem, it is their choice. This was meant as general feeling towards such people and NOT to you. So again, my profound apologies.

[kt315]

MFC don't worry, it was told to me.
kt315
1. I have not come to the forum for a long time and have not seen your request.2. Remember what you told me when I asked you oscilloscope and potentiometer ratings? And I'll ask you: why do you need CAD' files? Especially from pipetzh lenivogo?
I spent my time drawing a diagram based on the materials you provided and put them on the forum.Why do you need CAD' files for? They are not yet final. And most forum users will use them to assign itself the work done by me...
And for my work, kt315 and dbanner was now called me a mouse and a rat. Thank you very much for your opinion. And you think after that I would like to teach CAD' files for you??? Not sure.

first of all write YOUR COUNTRY you are from in your settings. i do not see your face, i do not know your country - WHO ARE YOU?

[LDTVN]

kt315 Do not refuse the answer, moreover, it is not very polite to answer question on the question
I it is I, and I do not have to report where I am from, where I studied and what I am doing.
Moreover, it has absolutely no relation to the topic!
dbanner, well forgot, we will assume that I took it very sharply, knowing that kt315 meant it was me under the mouse.

[kt315]

bla bla bla. bare attack. i had seen here them 1000'th.

[LDTVN]

Ha-ha-ha mutually.Now I understand why you are banished on many forums.
On this, our conversation is over.
Remember: Lyubopytniy Barbara snap a piece nose!

[kt315]

about you. crazy idiots in Russia had been keeped 100 years ahead.

[MFC]

Please Speak about detectors and electronics desings. This thread is for interchange information and new ideas , not for fighting, this don't resolve nothing. I told before that now are mounting a Deepers 10 board and maybe need to put potentiometers values from Deepers X5 because I dont have this info for the Deep 10DD sch.

[LDTVN]

Please Speak about detectors and electronics desings. This thread is for interchange information and new ideas , not for fighting, this don't resolve nothing. I told before that now are mounting a Deepers 10 board and maybe need to put potentiometers values from Deepers X5 because I dont have this info for the Deep 10DD sch.

MFC absolutely agree with you.

I told before that now are mounting a Deepers 10 board and maybe need to put potentiometers values from Deepers X5 because I dont have this info for the Deep 10DD sch.

Tell me please, you make your board? Or you will do the same as in the original?
You have a photo inside Deepers X5? What's the difference with Deepers 10DD?

[dbanner]

Deepers 8 with pot values

[LDTVN]

dbanner you do not understand the essence. Everyone has seen this scheme, and there are many differences in the item's values from Deepers 10. And there are no exact potentiometers values on it. For example, tell me what value have potentiometer TR6, 1k or 15k? How to adjust it correctly?

[dbanner]

TR6 on schem(deepers10) it says 25k, on deepers 8 says 25K multiturn. the associated components for tl081 are same on both schemes. Anyone with half a brain can figure out values from comparison of various schematics and some simple math. There is quite sufficient information contained in both schematics to fill in some missing values. Do some suduko for practice.

[LDTVN]

Now open your eyes, turn on the brain, and maybe then you will realize that the potentiometer value can be 0..25k.
If you do not understand what is being discussed here and you can not help anything then flooding is not needed.
There was no important message from you on this topic, only flood.

[dbanner]

It is plain as daylight, both schematics clearly say 25K for Tr6, not 0.25k. If they wanted 0.25K then they would have stated 250r as they did with damping resistor(470r). It is logical. Maybe sun doesn't shine where you live.

[LDTVN]

Or maybe you open a book and go through the course of radio electronics before writing a nonsense?
Because children in the school know that potentiometers can acquire different values, and the schematics shows only the absolute value.
Once you are so "smart" then you can look at the picture and give the answer what should be instead of the question mark?