SBG-PID

[dbanner]

How did you do that so fast ?

Deselect C1. Copy and paste bottom layer(C2) and(S1) unto New board(by right clicking on Board 1) now top layer is completely removed from photoview. Zhirkov know this secret technique.
Sprint layout designer software is for dummies(KT315 always say this). Scanned copy feature is for "lazy dummies".
I simply retraced Sacho layout.
I will not be sharing the file. I am making my own layout, which I will share.

[dbanner]

PPS 373(99.1%) to PPS 624(98.5%).
Is audio tone independent of PPS? I don't think so.

[dbanner]

Joining the bandwagon too?

[dbanner]

https://www.youtube.com/watch?v=N10A8wKlGAs

Primate see, primate do?

[dbanner]

Hi Sashco, could you please tell me the specifications of the meter , thank you.

Try 1000 ampere meter movement.

[scs]

Frequency changes for faster search and for work on high voltage lines.Meter is 0.5 mA.

[6666]

Deselect C1. Copy and paste bottom layer(C2) and(S1) unto New board(by right clicking on Board 1) now top layer is completely removed from photoview. Zhirkov know this secret technique.
Sprint layout designer software is for dummies(KT315 always say this). Scanned copy feature is for "lazy dummies".
I simply retraced Sacho layout.
I will not be sharing the file. I am making my own layout, which I will share.

Ok thanks

[6666]

Try 1000 ampere meter movement.

I overloaded my last 1000 amp meter

[6666]

Frequency changes for faster search and for work on high voltage lines.Meter is 0.5 mA.

Thanks for the meter information

[wallker]

What component is D2. Is it a 1A fuse?

1n5819. Diod shotki. Low droup-U in-out is 0,2V.This in 1n4007 is 0.7V.

Do you two talk about D1?

D2 is zener 4V7, right?

[Andi68]

Yes

[dbanner]

Schottky diode 1A, 40V.

[dbanner]

Do you two talk about D1?

D2 is zener 4V7, right?

D1 Schottky 1N5819, D2 zener 4V7.

[6666]

See? You people always ready to go to wrong conclusion. It is typo error, I meant 1000 micro amperes,(1mA) meter movement, which is most widely available meter for salvage from anywhere. 500 uA less common and harder to find for salvage.
Sacho has since stated 500uA Meter. Very well, fine by me.

See what ? I was deadly serious, in my profession we deal in thousands of amps at 50 volts

[scs]

The resistors R43 and R51 are selected according to the meter