Announcement

Collapse
No announcement yet.

Surf PI Micro Variant V1.00 :- PIC Controller hex file.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Surf PI Micro Variant V1.00 :- PIC Controller hex file.

    Hi all,,,Does anyone know where I can find the Hex file for the PIC Chip on the Surf PI Micro-Variant v1.00 PCB please? I have a bare board that I was kindly given and would like to begin building it but it didn't come with any files/Parts list etc,,,Thanks, Marty.

  • #2
    this one ?
    https://www.pcbway.com/project/share..._Var_1_00.html

    Comment


    • #3
      You can download it from my old website.

      http://eddy71.ucoz.net/load/fajl_pla...icro/1-1-0-105

      Description for schematic and firmware here:
      http://eddy71.ucoz.net/publ/obnovele...micro/1-1-0-79

      Comment


      • #4
        Thanks Eddy71

        Comment


        • #5
          Many thanks guys!,,,These are the 2 pcb's I have,,,Is the Surfmaster PI Micro variant Rev 1.00 the same as on your site Eddy? Thanks,,Regards, Marty
          Attached Files

          Comment


          • #6
            Originally posted by MartyJ1963 View Post

            Is the Surfmaster PI Micro variant Rev 1.00 the same as on your site Eddy?

            Marty
            Where did you buy this trough hole PCB?

            Comment


            • #7
              @WM6,,I didn't buy the pcb's, they were kindly given to me by a friend. I think he was given them as well. Regards, Marty.

              Comment


              • #8
                have some of the pcb here, had not time to assemble, sometimes i put some of these unfinshed stuff for free surprise into package of geotech friends if i send other project pcb
                alss available white tr2, or pitone pcb sometime it out some oft these into package togehter with pi polones(lucaslab pi pcb)

                Comment


                • #9
                  Originally posted by bernte_one View Post
                  have some of the pcb here, had not time to assemble,
                  Great!
                  Interested in Trough hole Micro Surf PI PCB.
                  How to get it?

                  Comment


                  • #10
                    No threshold memory button is inconvenient

                    Comment


                    • #11
                      Originally posted by WM6 View Post
                      Great!
                      Interested in Trough hole Micro Surf PI PCB.
                      How to get it?
                      It should be this one: https://www.pcbway.com/project/share..._Var_1_00.html
                      Not sure if it works though, ordered it about 8 months ago.... never got to me .... never got a refund.

                      Comment


                      • #12
                        Originally posted by Haidan View Post
                        It should be this one: https://www.pcbway.com/project/share..._Var_1_00.html
                        Not sure if it works though, ordered it about 8 months ago.... never got to me .... never got a refund.
                        Thank you. Trying to order there, but fall under Order Review, which can last.

                        Most links to documentation on PCBWay are dead.

                        Found another posting of this Eddy71 project on PCBWay, but with blocked access to Gerber files too:

                        https://www.pcbway.com/project/share..._________.html

                        Comment


                        • #13
                          @WM6,,I'm willing to swap the 2 different Surf PI pcb's for another project but wouldn't like to sell these as they were given to me. If you have a bare board project that is of interest I would consider swapping. Regards, Marty.

                          Comment


                          • #14
                            Very kind of you Marty.
                            I have some surplus of bare boards for a couple of projects.

                            Right now I am in process of ordering with PCBWay.
                            Still in order Under Review phase.
                            So I need to wait on outcome here first.

                            If order failing, I hope you will be still interested in swapping.

                            Comment


                            • #15
                              @WM6,,Thanks for the reply. I already have a few different Surf projects that I built so I wasn't really interested in building another but I keep looking for other projects to build to cure my boredom, Lol. What bare boards do you have? Let me know how your order goes. Thanks, Marty

                              Comment

                              Working...