Hobby replica Musketeer

[Ruben2000]

The TX circuit is very good. Generates nice sinus waveform.
I have used ltSpice for simulation of the TX circuit all the way to the output of the phase shifters. It is working. All seems very good.

Excellent banner!!
I just want a PCB image to make it happen.

[dbanner]

Here I post a sample of the redrawn schematic.

IT IS NOT YET FINISHED. I still must adjust the component values and do some tidying up. But as you can see, it will be a readable schematic.

[bgs]

Well done, you are great aesthetes. But you are not engineers. Where is the capacitor to p1 and p2? Very incorrect values in the generator!

[dbanner]

I will post complete schematic as soon as it is ready.

Thanks again bgs for sharing this design.

[dbanner]

Well done, you are great aesthetes. But you are not engineers. Where is the capacitor to p1 and p2? Very incorrect values in the generator!

Bgs, the schematic i posted is without the correct values. I still need to enter the correct component values. I use splan7 software.

I will post the complete accurate schematic soon.

Now if we can be serious, I would like to work on a pcb layout.

[dbanner]

P1 P2 ????

what are these? your schematic is not so easy to see everything.

[bgs]

R1R2 on your circuit. I hope when you make the detector you will be satisfied. There is a way to change some values to work very deeply.

[bgs]

By the way, the great generator is one of the reasons it works well. The analysis of the signal is like that of Musketeer, it is practically the best discriminator.

[Ruben2000]

Thanks to the contributions of bgs and banner, I believe that this project is going to be on the right track. I am not a wise person in electronics but I will help as much as I can.
Thank you very much guys!!!

[dbanner]

Schematic redraw is complete. I designated it as V1.1 so if there are any errors, those can be corrected in future versions. The main thing is that the circuit is now a little clearer. If you see any errors, please let us know.

There are still few questions I have for bgs, but I will leave those for later.

[dbanner]

I have noticed some resemblance with Relic Hawk schematic.

[bgs]

Regulator, timer, many errors! I do not deal with works of circuitry. Do what you want.

[dbanner]

Corrections are made. By the way, your schematic ain't exactly a Picasso either. More like Edvard Munch "The Scream"

[dbanner]

Latest version

Added label for two-tone ferro switch.
ICM7555.
coil details

[Artyom]

[QUOTE=dbanner;293495]Latest version

the upper output of the volume control is connected incorrectly