1266 and CZ5

[Esteban]

Administrator

Wish to post:

1. CZ5 schematic (handrawing) and PCB

2. 1266 split PCB and mods.

The both was sent to me by our friend in absence Jackdetect. The CZ5 files he sent me July 24 2004, and the 1266 files August 1 2004. The files contain screen captures in jpg of the email with attachments. As the files are large, what I can to do? Here in jpg the files and lenght:

[Northerntrowel]

Hi! Esteban

If you can't post These files on the forum

Can you send me the CZ-5 files to my email??? S.V.P

Thanks!!
[email protected]

JF

[Esteban]

I can post part by part, but don't wish disperse files.

[Geo]

Hi Esteban. I am interesting for cz5 and 1266 schematics and pcb's
Regards

[Carl-NC]

Esteban, email the files to me, I'll figure out how to get them posted.

- Carl

[Qiaozhi]

Administrator

Wish to post:

1. CZ5 schematic (handrawing) and PCB

2. 1266 split PCB and mods.

The both was sent to me by our friend in absence Jackdetect. The CZ5 files he sent me July 24 2004, and the 1266 files August 1 2004. The files contain screen captures in jpg of the email with attachments. As the files are large, what I can to do? Here in jpg the files and lenght:

Hi Esteban,

Why don't you zip the files and upload them to www.mytempdir.com?
Maximum file size there is 50MB.

[Esteban]

I post to Carl. Usually I use mytempdir.com (remember?) but the files stay for few time.

[Qiaozhi]

I post to Carl. Usually I use mytempdir.com (remember?) but the files stay for few time.

Yes - it was probably from you that I learnt about mytempdir.com.

[Geo]

Hi Carl. What about the CZ5 and 1266 files:confused: ? I can't believe that you can't post them here .
My regards

[Carl-NC]

Sorry, got busy & forgot...

Here are the 1266 files.

[Carl-NC]

And the CZ5...

[Geo]

Bravo Carl.
Thanks

[ivconic]

Good machines!


Wanna make CZ5??? Are u outa yr mind??? Wish u much luck!

1266 is not so big deal, i started hand drawing pcb's...only have doubts about that transformer??? How to wind up it???
Maybe is possible to use capacitive coupling instead inductive there? Due avoiding that "sheesh" transformer??? Am i correct?
regards!

[Geo]

Wanna make CZ5??? Are u outa yr mind??? Wish u much luck!

1266 is not so big deal, i started hand drawing pcb's...only have doubts about that transformer??? How to wind up it???
Maybe is possible to use capacitive coupling instead inductive there? Due avoiding that "sheesh" transformer??? Am i correct?
regards!

Hi Ivconic.
Good Luck
When i saw the schematic of CZ i saw that it is a difficult project. So i let it. Now i am looking to build a generator for LRL's. I will try with LRL. By the way do you know russian to translate me something?
Now about transformer. No will not work with capacitors. There are two ways.
1. Try a audio transformer from a old transistor radio (a little difficult to find it??)
2.You must put two gates to generate two signals wit 180 degrees difference. So you will be ok.
Again my friend Good Luck
and
Happy New Year
My regards

[ivconic]

XR2206

"Now about transformer. No will not work with capacitors. There are two ways. 1. Try a audio transformer from a old transistor radio (a little difficult to find it??)..."

No it is not,i think i have few left in my junk box...I'll see...


Generator.....give a try with XR2206...or ICL8038.....I have good experiences with 2206....but i wouldnt waste my time on lrl....I used 2206 as oscill. when experimenting with some detectors.....interesting...
regards
P.S.
If somebody already know how to make transformer,please let us know!