Tiny2

[1843]

Hi,
Does anyone know what is the Tiny2 parts list?

:confused:
Reagrds

[amtech2005]

tiny2

I went to the website again and downloaded everything I could and studied , Heres what I found . Stuckliste or in english is parts list , and is only available for Tiny and the twiggy and mini-pulse 3. Not "ATINY 1-4" or anything else. All the rest are incomplete , the schematics are with no component values. There are several high end units for sale. Several years back I believe everything was posted , around 2001 . At the time I had everything , but later my hard-drive went bad and lost all Data/files. I am sure they changed the website Too !! Sorry I cant Help You , but I Tried . Keep looking because somebody has what you want . Have a Good Day !! Eugene [email protected]

[gmac3211]

Hi,
Does anyone know what is the Tiny2 parts list?

:confused:
Reagrds

Tiny1 parts list is in the pdf file, and Tiny2 is based on Tiny1, so you should be able to use T-1 parts list.

[bernte_one]

i have build tiny 1
http://www.youtube.com/watch?v=wH_IIfJQvtA

for the tiny 2 use the same part list (most parts)

the changes are made by some pots to make it more individual for all user
for example tiny1 has no delay trimmer pot the tiny 2 has one
another mod is to replace the damping resitstor with a pot (wire potentiometer something around 4w) so you can use a wide spectrum of coils big frame coils and too small pointing coils and so on

here the partlist edited by kaime for tiny 1 some comments by me (many thx to kaime)
http://www.pulsdetektor.de/apboard/t...=389&BoardID=3

Transistoren [Q]:
[Q1] -------- MTP2P50E (PMos/500V) ( modable: replaceable by irf9640 an protection diodes)
[Q2 / Q3] --- BC547
[Q4] -------- BC557

IC`s [u]:
[U1 / U8] --- NE555 (or better tlc555)
[U2] -------- LF357 (cheapest one per ebay from china 5piece pack)
[U3] -------- HEF4053
[U4] -------- TL082
[U5 / U6] --- HEF4528
[U7] -------- LF356
[U9] -------- CNY17 (better the one with higher gain cny17 type4)
[U10] ------- ICL7660
[U11] ------- 78L08

Dioden [D]:
[D1] -------- 1N4007
[D2 / D3] --- 1N5817 (Schottky)

Kondensatoren [C]:

-Vielschichtkondensatoren (Ker. = Keramik):
[C9 / C7] --- 3,3nF
[C18] ------- 330pF = 0.33nF

-Folienkondensatoren (Mks):
[C2 / C10 / C11] ------------- 10nF
[C3] ----- ------------------- 33nF
[C4 / C5 / C6 / C16 / C17] --- 100nF
[C8] ---- ---- ----- --------- 47nF

-Elekrolytkondensatoren:
[C1] ---------- 4700yF-10000yF / min. 16V (nehmt den 10000yF!!! is better )
[C13 / C12] --- 47yF / 16V
[C15 / C14] --- 470yF / 16V

Widerstände [R]:

[R1] ------------------------------------ 2K - 2,2K / Metallfilm / 2W (replaceable by pot)
[R2 / R3 / R4 / R26 / R28 / R33] -------- 1K / Metallfilm
[R11 / R12 / R21 / R22 / R23 / R25 / R35] --- 10K
[R8 / R13 / R14] ------------------------ 1M = 1000K
[R19 / R20 / R24] ----------------------- 15K
[R30 / R31] ----------------------------- 22K
[R15 / R16] ----------------------------- 2,2M = 2200K
[R7 / R10] ------------------------------ 560
[R5] ------------------------------------ 68K
[R6] ------------------------------------ 5,6K
[R9] ------------------------------------ 50K / Trimmer
[R17] ----------------------------------- 4,7K
[R18] ----------------------------------- 150K
[R27] ----------------------------------- 100K
[R29] ----------------------------------- 22
[R32] ----------------------------------- 220
[R34] ----------------------------------- Poti 10k mit Schalter