Announcement

Collapse
No announcement yet.

Metal detector with double tone and reject discriminator- new schematic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Thanks Very Much Dear Friends Please Upload PCB

    Comment


    • #32
      All Sasho's schematics are interesting. So i decided to draw pcb for this one. And i was just about to start when i saw this:

      Attached Files

      Comment


      • #33
        I think this TX will never work, wired as on schematic. Sasho must made mistake in a hurry?
        Sasho can you comment this?
        Thanks in advance!

        Comment


        • #34
          I think this should be proper wirement, agree?
          Attached Files

          Comment


          • #35
            In this way isn`t base of tranzistor shorted to "-" ? Is this correct? Both base and emiter goes to minus . Base via L1 .

            Comment


            • #36
              A similar oscillator:
              Attached Files

              Comment


              • #37
                Originally posted by Pompey View Post
                In this way isn`t base of tranzistor shorted to "-" ? Is this correct? Both base and emiter goes to minus . Base via L1 .
                Yes i see. Maybe i am wrong, but i also can not figure out the first case?
                Would be best to hear from Sasho.
                Ahhh it is that awkward way to draw schematics..!

                Comment


                • #38
                  Originally posted by ivconic View Post
                  Yes i see. Maybe i am wrong, but i also can not figure out the first case?
                  Would be best to hear from Sasho.
                  Ahhh it is that awkward way to draw schematics..!
                  You can make only Tx generator and L1 and see if it work.

                  Comment


                  • #39
                    Originally posted by Pompey View Post
                    You can make only Tx generator and L1 and see if it work.
                    I agree. Best way to figure it out!

                    Comment


                    • #40
                      Originally posted by Magma View Post
                      A similar oscillator:
                      Where did that schematic come from?

                      Ivconic: 100 pF is nothing, and not meant to send signal anywhere, but rather to cancel stray capacitance from sloppy wound coil imo. It seems that Sasho has not been around for a while. You could make circuit board to go both ways to see which one works best. I think Sasho's design has been tried and works.

                      Comment


                      • #41
                        Originally posted by Magma View Post
                        A similar oscillator:

                        Simulated this oscillator with proteus software . worked correct.

                        Comment


                        • #42
                          Originally posted by ivconic View Post
                          I agree. Best way to figure it out!


                          Hi ivconic
                          I built this oscillator , working correct without problems .also has very good
                          Stability .

                          Comment


                          • #43
                            ivconic ,if I remember correct, also one of the fisher detectors used similar
                            Oscillator
                            Attached Files

                            Comment


                            • #44
                              I'm not sure, some Russian detector.

                              Comment


                              • #45
                                Originally posted by aft_72005 View Post
                                ivconic ,if I remember correct, also one of the fisher detectors used similar
                                Oscillator
                                aft_72005 now i am confused? Part of schematic you are posting now is not what i am confused about!
                                That oscillator is clear to me.
                                The other one part of schematic i posted twice (first Sascho's and second with my wrong corrections) is what i wanted to clear up.
                                Regards!

                                Comment

                                Working...
                                X