Serbian "Most Wanted"

[ata]

This photo has already been sent by ivconic
Can someone explain why this capacitor is not in the lay file? please

[ata]

this

[Emersonpaz]

Ivconic added this capacitor in a switch to change the pitch of the sound.

[ata]

Thank you very much for your reply. If we don't put this capacitor, won't there be a problem?

[gurdal]

It does not cause any problems in the operation of the device.

[Mouloud]

Think you

[gurdal]

Hello friend Marty is a jumper the same ones used in used computer bios[ATTACH]57742[/ATTACH][ATTACH]57743[/ATTACH][ATTACH]57744[/ATTACH]

Greetings to everyone,
in my hand
TX 1.537 MH 3 om
RX 11.08MH 26.2 om
32x27 there is a title,protected with foil.
What should be the appropriate capacitor value for the best depth and frequency suitable for these values?

yours truly

Gurdal

[bonchev2]

Hello colleagues, I have a simple question. Where should the oscilloscope be connected to nulling the coils? Pin 8 lf347 or pin 1 & 14? Thanks!

[lidl]

here mate

[bonchev2]

As I thought. I ask because when I place the coils one next to the other and look for the minimum sine wave it gets destroyed. Thank you Iidl. I continue to search the problem

[bonchev2]

I found the problem. The cable I am using is the problem, 4 core total shielded 2547.