New PCB for Classic3 and some mod's

[Daemon]

Now it powers up from 4 AA cells. Potentiometers and switches resides on the board + some minor improvements in the sch. Good luck!
http://slil.ru/24990035

[ApBerg]

Hello Daemon

Thanks for the files, nice work ! You have some info for L1 and L2 ?

Ap

[aft_72005]

Hi Daemon
Your working is good but it was better if will be single layer PCB.
Can you upload your drawing source file here?
Regards.

[kt315]

Hello Daemon

Thanks for the files, nice work ! You have some info for L1 and L2 ?

Ap

standart values. you can find out it from any datasheet on MC34063.

[kt315]

Hi Daemon
Your working is good but it was better if will be single layer PCB.
Can you upload your drawing source file here?
Regards.

have you installed PCAD-2004 on your HD?

[aft_72005]

Hi KT315
I have pcad 2004 software but not installed on computer , installing it today.
Can you upload source file here or to my email ?
My email : [email protected] .
Best regards.

[Daemon]

Hi All,
Sorry for silence. I could not answer so long since I'm waited the letter for my account activation.
L1 is smth about 330 uH and L2 is simply ferrite bead.

aft_72005, you have got the source, but i'm really doubt that this pcb may be single-layer for that size.

Regards.