Announcement

Collapse
No announcement yet.

Whites Surf PI schematic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by ApBerg View Post
    Hello Dirceu

    I have send you a PM have you received it....?

    Ap

    Hi! ApBerg

    Is possible you post here your PCB of Whites surfmaster PI ?
    Thanks in advance

    Dirceu

    Comment


    • #17
      Is possible you post here your PCB of Whites surfmaster PI ?
      Thanks in advance

      Dirceu

      Hello Dirceu.

      Made a long pcb( 2side pcb) some years ago, easy to make it waterproof. Think I made it in protel, have to sears for it. As I remember it was sometimes a litle erretic indoors. Never used it for real searsing, made only some proto's. Can send in a Pmail the pcb file (need to sears on some cd's) if you have interest in it ?

      Regards.

      Ap
      Attached Files

      Comment


      • #18
        Originally posted by ApBerg View Post
        Is possible you post here your PCB of Whites surfmaster PI ?
        Thanks in advance

        Dirceu

        Hello Dirceu.

        Made a long pcb( 2side pcb) some years ago, easy to make it waterproof. Think I made it in protel, have to sears for it. As I remember it was sometimes a litle erretic indoors. Never used it for real searsing, made only some proto's. Can send in a Pmail the pcb file (need to sears on some cd's) if you have interest in it ?

        Regards.

        Ap

        Hi ! APBERG

        Wow!... nice work man!
        Its beautifull!
        Yes, ... send me please and thanks a lot.


        Dirceu

        Comment


        • #19
          Originally posted by ApBerg View Post
          Is possible you post here your PCB of Whites surfmaster PI ?
          Thanks in advance

          Dirceu

          Hello Dirceu.

          Made a long pcb( 2side pcb) some years ago, easy to make it waterproof. Think I made it in protel, have to sears for it. As I remember it was sometimes a litle erretic indoors. Never used it for real searsing, made only some proto's. Can send in a Pmail the pcb file (need to sears on some cd's) if you have interest in it ?

          Regards.

          Ap
          Hi APBERG!

          I received your Pmail. Thanks.
          I'll work in this project now.


          Regards

          DIRCEU

          Comment


          • #20
            Hello

            could you post info here like below example which white 's JVN pictures


            http://www.savefile.com/files/1506155

            regards
            Unregistered

            Comment


            • #21
              whites jvn

              http://www.teknolojiekibi.com/yeni/i...?topic=1008.20

              Comment


              • #22
                Warning! Do not use the link above!

                Originally posted by Unregistered View Post
                Hello

                could you post info here like below example which white 's JVN pictures


                http://www.savefile.com/files/1506155

                regards
                Unregistered

                Comment


                • #23
                  Originally posted by Aziz View Post
                  Warning! Do not use the link above!
                  Can you please elaborate on your warning?

                  Comment


                  • #24
                    This mentioned site has worms and virus!
                    It causes defects on the windows system.

                    Be aware!

                    Comment


                    • #25
                      Back again:
                      Now having a new fresh windows version.

                      I can recommend XXClone and multiple small windows partitions (10 GB), which can be copied in few minutes.
                      Everybody should renew his windows system every four weeks at least! I didn't make this for several months and it was time to get all trojans, worms, virus, etc. from the system.

                      Aziz

                      Comment


                      • #26
                        Originally posted by Aziz View Post
                        Back again:
                        Now having a new fresh windows version.

                        I can recommend XXClone and multiple small windows partitions (10 GB), which can be copied in few minutes.
                        Everybody should renew his windows system every four weeks at least! I didn't make this for several months and it was time to get all trojans, worms, virus, etc. from the system.

                        Aziz
                        You should always practise safe-surfing...
                        It only takes 12 minutes (on average) to contract a virus, while surfing the web, if you don't use anti-virus protection.
                        Either that or switch to Linux.
                        Attached Files

                        Comment


                        • #27
                          Originally posted by Qiaozhi View Post
                          You should always practise safe-surfing...
                          It only takes 12 minutes (on average) to contract a virus, while surfing the web, if you don't use anti-virus protection.
                          Either that or switch to Linux.
                          Hi Qiaozhi,

                          I have used back|track 2 for some time in conjunction with VMware. So with VMware, it is also possible to start windows in a secured environment.
                          It doesn't matter, to have some trojans, virus, etc. They remind me to tidy up the system. Often, it is convenient to set up the router to drop the IP within a minute. So every minute, I have a new IP adress. I am doing IP-hopping!

                          Some websites take the IP adress for attack when they are visited. There are too many unserios file sharing sites, using this method. Using anonymizer web site, could be a solution.

                          So periodically using fresh system avoids also the government trojan (german government trojan).

                          Regards,
                          Aziz

                          Comment


                          • #28
                            Originally posted by Aziz View Post
                            Hi Qiaozhi,

                            I have used back|track 2 for some time in conjunction with VMware. So with VMware, it is also possible to start windows in a secured environment.
                            It doesn't matter, to have some trojans, virus, etc. They remind me to tidy up the system. Often, it is convenient to set up the router to drop the IP within a minute. So every minute, I have a new IP adress. I am doing IP-hopping!

                            Some websites take the IP adress for attack when they are visited. There are too many unserios file sharing sites, using this method. Using anonymizer web site, could be a solution.

                            So periodically using fresh system avoids also the government trojan (german government trojan).

                            Regards,
                            Aziz
                            Using VMware does not isolate your virtual Windows system from the rest of the world if it is bridged to the host. IP-hopping seems an unnecessary complication when you only need to buy some anti-virus software. Personally I use both Windows (with Norton Anti-Virus) and Ubuntu Linux. The Linux system is faster, more secure, and virus-free. The installation was quite painless, and wireless networking and intranet file sharing were ok. It just works. Setting up a printer can sometimes be a pain, but I can even print to my Lexmark Z55 that's connected to my Windoze box. I'm starting to use Linux in preference to Windows wherever possible.

                            Try it - you might like it -> https://wiki.ubuntu.com/HardyHeron

                            Comment


                            • #29
                              Hello

                              I want to ask coil info of Windows sorry Whites surf Pi


                              Regards
                              Erol

                              Comment


                              • #30
                                Hi!
                                I have done PCB for SurfmasterPI in Layout.
                                Layloat files you can download here : http://www.md4u.ru/forum/viewtopic.php?t=268 . Maybe there is some mistake.

                                Comment

                                Working...
                                X