Announcement

Collapse
No announcement yet.

Whites Surfmaster PI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Whites Surfmaster PI

    Recieve a trashed out Whites Surfmaster PI.

    It seems to have been swamped out with salt water.

    Funny enough the circuit board looks ok exept a few points corroded. Reflow solder would clean it up!

    Coil is good. Housing is trashed!

    Pots are so rusted, I can't find any ratings on them and I dought if they are working at all.

    Any one have a schematic on this beast?

    Circuit board is most small!


  • #2
    OOOps Found it! Bit hard to read but workable!

    http://www.geotech1.com/forums/showthread.php?t=13810

    Comment


    • #3
      Hi! I built an Surfmaster PI, and from fixed schematic. Works more than well, but It is a beach detector PI and reacts to everything...(even gold!)
      Very very nice detector and I advise anyone who wants a simple PI to go on the beach with it, and be sure to find nice stuff.

      Comment

      Working...
      X