Superscan PI

[rospy]

The circuits



The Detector

[Geo]

SuperScan from Eric Foster.
Maybe the best PI detector for big objects at big depth!!!!

[aft_72005]

Hi to all
Super scan Circuit that upload by rospy, didn’t has good draw.
Anybody having better draw for superscan?
Best regards.

[aft_72005]

Hi rospy
I saw super scan movie ,seem as deeper than delta pulse .
My delta pulse be able detected 1 euro coin from 40cm at air.
Coil diameter is 40cm.
Best regards.

[okantex]

I saw a superscan which has almost 60-70 cm coil.it detected metal cigarette lighter from 2 m in air.but coil ws too heavy to carry.

[rospy]

Hi rospy
I saw super scan movie ,seem as deeper than delta pulse .
My delta pulse be able detected 1 euro coin from 40cm at air.
Coil diameter is 40cm.
Best regards.

1 euro coin from 40cm at air..........

I don't think.My pi(delta pulse) 1 euro at 25cm at air.

[aft_72005]

60-70 cm coil.it detected metal cigarette lighter from 2 m in air

Hi okantex
I newer hearing like it yet .
Best regards.

[rospy]

I saw a superscan which has almost 60-70 cm coil.it detected metal cigarette lighter from 2 m in air.but coil ws too heavy to carry.

I think this is very,very difficult to happen.

[aft_72005]

1 euro coin from 40cm at air..........

I don't think.My pi(delta pulse) 1 euro at 25cm at air.

That was my result , by some changes .

[rospy]

What changes ??????.

[okantex]

I do not think that above schematic is real superscan, because real superscan 's components are similar to delta pulse ,but uses 2 12V batteries., 2 mosfets with cooler aluminium parts,..etc.

[rospy]

I do not think that above schematic is real superscan, because real superscan 's components are similar to delta pulse ,but uses 2 12V batteries., 2 mosfets with cooler aluminium parts,..etc.

No my friend this is the real.Superscan is not the same as delta pulse,

Who said that.

[okantex]

Rospy ,
I am talking about the device I saw ,also opened the box for repair ,but could not. it name was superscan , it was handmade ,
anyway ,good luck to you .

[Unregistered]

ROSPY

Are your test result on workbench or on the ground?

[Unregistered]

Hi rospy,

You post the schematic and we see who can post best PCB Drawing.


Thanks for your MD pic...