Superscan PI

[Unregistered]

hi,

OMEGA 2002; ROSPY

[okantex]

coil was on the ground and lmetal lighter was over my head, I was holding in my hand.
I do not have schematic ,I was not mine.
but ICs were same as delta pulse.
regards,

[rospy]

coil was on the ground and lmetal lighter was over my head, I was holding in my hand.
I do not have schematic ,I was not mine.
but ICs were same as delta pulse.
regards,

it's the same for all pi,my friend.The deference is the power supply...24V(Superscan)

[1843]

The circuits



The Detector

Great! Thank you very much!
Some parts don't have any lable?

[rospy]

Ok sorry...

[Alexismex]

Hello Rospy,
Can you help me to clarifies some details ,thank you
Alexis

[nelson]

Hi aft_72005.
Can you share your 40 cms coil data.
I had build one 1 x 1 meter coil for my delta pulse. I didn´t have the time to try it out of home, so it seems to detect a small paint can at about 1.3 meters. Now i ll like to make a small coil like the one you did.
Regards
Nelson

That was my result , by some changes .

[aft_72005]

Hi aft_72005.
Can you share your 40 cms coil data.
I had build one 1 x 1 meter coil for my delta pulse. I didn´t have the time to try it out of home, so it seems to detect a small paint can at about 1.3 meters. Now i ll like to make a small coil like the one you did.
Regards
Nelson

Hi Nelson
My coil data:
Test frequency = 100HZ
0.615 mH , Q= 0.363 conductor= CU, dia= 0.7mm R = 1- 1.2 ohm
Best regards .

[Raptor]

Rospy, interesting coincidence:
http://www.rospy.gr.gg/%26%23913%3B%...6%23945%3B.htm
and:
http://www.mikronbg.com/images/New%20frame.jpg

[Raptor]

-

[rospy]

Καλο σου αρεσε ?

[ahmet19]

hallo
I have superscan PCB can be used.
How to add a picture as good PCB What should I do?
The file can be used as Lay. but I do not know how it is installed here

I talked with rospy. I wanted to help me. did not help. There are some errors. have friends here will help?

[Qiaozhi]

hallo
I have superscan PCB can be used.
How to add a picture as good PCB What should I do?
The file can be used as Lay. but I do not know how it is installed here

I talked with rospy. I wanted to help me. did not help. There are some errors. have friends here will help?

When you post a reply, or create a new post, scroll down the page and you will see a button labelled "Manage Attachments".

[strujas]

Does enyone have a single side pcb for superscan ?

[nelson]

Hi aft_72005.
Does your 40 cm coil for delta pulse work stable, cause 1 to 1.2 ohms of resistance must get IRF740 to hot?
How do you fix this?
Thnkas
Regards
Nelson

Hi Nelson
My coil data:
Test frequency = 100HZ
0.615 mH , Q= 0.363 conductor= CU, dia= 0.7mm R = 1- 1.2 ohm
Best regards .