Need help desperately Tesoro Bandido Wires

[solmer2]

Hi, I've disassembled my Tesoro Bandi uMax but some wires went off and I've not idea how to reconnect them.

Any help will be appreciated. I've attached some pics and a pinout of the PCB lower zone.
Thank you very much in advance for your help.
Can someone mark the corrects pins with wires colours?

[Qiaozhi]

Hi, I've disassembled my Tesoro Bandi uMax but some wires went off and I've not idea how to reconnect them.

Any help will be appreciated. I've attached some pics and a pinout of the PCB lower zone.

Can someone mark the corrects pins with wires colours?

You forgot to attach the pictures.

[WM6]

Hi, I've disassembled my Tesoro Bandi uMax

Congrats, you disassemble it very succeful.

Hope someone can help you.

At the same time, this can be lesson for all us how (NOT) to accede to the dismantling of equipment.

Never do such "repair" withouth sketch and color pencils for drafting of wire passing and wire bond connections

or (wich I prefer)

use water resistant color flumaster similar collors as individual wire and mark on both soldering point of each wire (in form of color points or numbers).

[woody]

bandio wires

found this some time ago on the net hope it helps

[solmer2]

Yeah

I marked all connections but my work mate lost the laptop with the pictures and schemes !!!

By the way do you know a good Hitman ? I'm thinking about hiring someone as a gift for my pal......

I've dissasembled another units sucesfully, i know that is very important to take care and mark all the wires (i use permanet ink markers).

Thanks

[solmer2]

Wires !!!

found this some time ago on the net hope it helps

YEsssssss that is what i was looking for ! I'l try to fix them all.

Thanks so much for your help

[woody]

glad i could help