If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Very good and nice work dfbowers, this is good to show to another people that .... yes is possible to make a good and also a nice esthetically equipment ,
congratulation,
Alexis.
Yes, I experimented with the GEB mod beforehand, with limited success. It seems like I could not get the range of adjustment correct, maybe because phasing was not correct to begin with. I took the idea from one of the previous posts and since I had a handful of TL061 IC's I just made a new PCB and added it . Maybe not optimal but it works just fine.
I did have a little trouble in the Russian to English translation so I thought that I would post here as well.
KT315, in our original design, are you using a tapped TX coil?
How did you null the device? Did you look for a certain phase shift at pin 1 of U1A (in reference to pin 1 of JP4) or did you just adjust the coils to minimum voltage at the 1/U1A?
Got a rgaminte to you what the forum .. I do not know English and do not really understand what am I doing talking to you on the forum ... what I really want or rather what I want to help me .... I want one or two schemes VLF metal detector but are complete! (Wiring, schematics, etc to the mounting plate) that is to be in detail from A to Z that I saw something on the forum but I do not know that as ... imeil to thank you very much if you can [email protected]
Excellent unfortunately it does not discriminate. Hello.
Orbit, yes VS is only White's' All-metal mode with some mods... but people who done VS wrote the disc has a place to be... only you have to get some experience at field... a money signal is different vs ferro...
Comment