ib metal detector

[OLDMAN621]

Where is the circuit and schematic ?

[lucifer]

Where is the circuit and schematic ?

In the first post, or here: http://md04.narod.ru/An50/Anker50.GIF

[Geo]

Yes, it is Anker50.
Since you have constructed it, what is your experience with it? Is it so sensitive as stated in text?

I'm almost ready with translation from Russian.

Hi.
1. .... very much power suply current (about 250... 280ma) for the SS60.
2. No Ground balance. There is a trimer for one time adjust. If you adjust again it you lose the discrimination.
3. Good sensitivity but need bigger coil for 50cm discrimination distance. With 30cm coil i had about 40cm for a 2euro coin. A very strong detector but as Ivconic said me one time..... not so strong in the ground.
I believe that it is a strong detector if you will use big coil and you are looking for relics (large objects at lerge depth). If you are looking for coins...... TGS is special

Regards

[mesy64]

can i used this detector in t/r locator to ib detector????(replase t/r whit ib tape)???

[mesy64]

build coil in this detector is very hard .can i build coil to regulare coil for ib tape???????
can i use this detector in t/r tape?????
geo and lucifer you built this detector .please help me for problames.
plase help me about build l1,l2,l3????
please ???????

[lucifer]

I haven't built this detector, I am currently working only on my own designs.
I think if you want to build a two box detector, you better find a TR schematic.

[mesy64]

I haven't built this detector, I am currently working only on my own designs.
I think if you want to build a two box detector, you better find a TR schematic.

please see this link and give opinion
http://www.geotech1.com/forums/showthread.php?t=16116

[mesy64]

hi to all
happy new year
please help me for build coil for anker50??
l1-l2-l3????
please help????

[aft_72005]

hi to all
happy new year
please help me for build coil for anker50??
l1-l2-l3????
please help????

Hi mesy64
What's Anker said , SS60 designed by Anker

[aft_72005]

Anker 50 and SS60 coils was similar .

[mesy64]

Anker 50 and SS60 coils was similar .

tank you dear freind
what is L3???
PLEASE GUID ME FOR BUILD L3????THIS COIL IS NECESERRY IN CIRCUIT???
I KNOW NOT THAT BUILD L3.PLEASE GUIDE ME ABOUT THIS PROBLEM
BEST WISH

[aft_72005]

tank you dear freind
what is L3???
PLEASE GUID ME FOR BUILD L3????THIS COIL IS NECESERRY IN CIRCUIT???
I KNOW NOT THAT BUILD L3.PLEASE GUIDE ME ABOUT THIS PROBLEM
BEST WISH

Concentric coil included 3 coils, for more information, search US patents at geotech
Forum .
What's Anker said was complete, however,
RX/ CX= 10 /1 , CX= 25 turns

[mesy64]

Concentric coil included 3 coils, for more information, search US patents at geotech
Forum .
What's Anker said was complete, however,
RX/ CX= 10 /1 , CX= 25 turns

TANK YOU DEAR

I DROW A PLANE THAN COILS ANKER50.THIS PLANE IS CORRECT????
I SHUILD INSERT COILS SIMILAR PICTURE????????

[Esteban]

In main page of Geotech you can learn how winding these coils. The opposite coil in winding (part of TX coil) is called bucking coil:

http://www.geotech1.com/cgi-bin/page...anar/index.dat

[mesy64]

In main page of Geotech you can learn how winding these coils. The opposite coil in winding (part of TX coil) is called bucking coil:

http://www.geotech1.com/cgi-bin/page...anar/index.dat

tank you dear
what is L3 in circuit????please guid me about l3 and what i should build l3 and what using in side l1 and l2????
please guid me for this problem
best wish