Emfad 12/g schematic needed

[Geo]

Thanks Geo. They are different somewhat but not much. I will make a pc board and test these here in the states. Thanks for the help..

Hi Tim.
Do you have schematic for the pcb or you will draw one???
Maybe my friend to have one

Regards

[Tim Williams]

I will lay it out in Eagle program and have a couple made to test with.

Tim

[Geo]

I will lay it out in Eagle program and have a couple made to test with.

Tim

Hi Tim.
Please check again your email

Regards

[Tim Williams]

Got it. I will let you know what I find. It will be a while.

Tim

[Auftragssucher]

I'm also interested in the schematics of the EMFAD.
Can anyone send it to amaassen@auftragssucher.de ?
THANK YOU!!!

[krify]

Hi Tim,
Any Luck with the schematic ? Did it work ?
I would try to build an EMFAD too, so any help would be appreciated.
Could you please send me the schematics ?
Thanks.
Krify

[strujas]

Schematic would not help you much , where do you think to find a hex code for pic 16f873?

[Geo]

Schematic would not help you much , where do you think to find a hex code for pic 16f873?

He can use only the analog part. It is a complete passive receiver with a moving coil instrument at the output.

[okantex]

hi Geo ,

did you changed your email address
can you send me file , I would like to inspect ,
I saw an emfad schematic at a greek site ,but it was wrong as I remember
okantex

[Geo]

hi Geo ,

did you changed your email address
can you send me file , I would like to inspect ,
I saw an emfad schematic at a greek site ,but it was wrong as I remember
okantex

Hi Okan.
I changed my email but you can email me from geotech or sent me a PM so to answer to you.
I am not sure if i have the schematic of Emfad because i had a big problem with one hard disk. I try to remember so to look at backup dvds. If i will find the file i send it to you.

Regards

[mkestane]

Hi Okan.
I changed my email but you can email me from geotech or sent me a PM so to answer to you.
I am not sure if i have the schematic of Emfad because i had a big problem with one hard disk. I try to remember so to look at backup dvds. If i will find the file i send it to you.

Regards

Thank you............

[teknoloji]

Hello there.
I was going to ask you to share a few files shots made with 12 ug EMFAD.
the world is in the hands of people the ability to install here.

Best Regarts

[ramirz]

Hello friends, the topic is a bit old, but I couldn't get it to work even though I made the emfad 12/4 circuit exactly, I wonder if there is anyone who can help me about the tuning

[Qiaozhi]

Hello friends, the topic is a bit old, but I couldn't get it to work even though I made the emfad 12/4 circuit exactly, I wonder if there is anyone who can help me about the tuning

You only need to post your question in one place, not in multiple threads. I have removed the identical post you made in the Tech forum.

[ramirz]

ok sorry i didn't know the forum rules