Link Bandido II New Schematic

[Gosho]

Bandido II New Schematic made with eagle 4.11
If any1 know more about this project is welcome !
ftp://ftp.cadsoft.de/pub/userfiles/projects/bandidoii.zip

[driscoll]

Re: Link Bandido II New Schematic

Hi,

It was published on older post, but there are some mistakes on the schematic.

ERRORS
There is no ground connected on TX coil and the connexion on TX caps is bad....

Please look at older posts

[Gosho]

Re: Link Bandido II New Schematic

yes thank you i saw the post earlier today;
i really dint find any information for the coils and conectors.Its useless i think without this info.

[Carl-NC]

Re: Link Bandido II New Schematic

Some time ago, I posted the inductances of the TX & RX coils. I don't have the info right now, but will try to remember to post it tonight. The design will probably allow quite a bit of coil parametric variation (i.e., "slop"), and any connector will work, though Tesoro uses SwitchCraft brand.

- Carl

[Gosho]

Re: Link Bandido II New Schematic

Thanks Carl,do you know who originally designed this scheme(Eagle 4x).If he is bulgarian i think he is i could as him for more details about this project;not only the coils are problematic but the external conn too

[Carl-NC]

Re: Link Bandido II New Schematic

Don't know, nor can I open it since I don't have the Eagle software. I have my own Bandido II uMax schematic, posted on this web site, if you want to compare.

The inductance of the coils are:

TX: 5.7mH
RX: 6.2mH

- Carl

[Gosho]

Re: Link Bandido II New Schematic

Ok the man who made it contacted me.thanks for the supp, i will try your schematic next
its a perfect reconstruction

[Pepso]

Re: Link Bandido II New Schematic

I know some people which tried to build Bandido using that bulgarian design. They had corrected all the known mistakes but no success, Bandido did not work with that PCB. Gary's PCB is only working Bandido board I know.

[Gosho]

Re: Link Bandido II New Schematic

yes i will make his bandido next

[Pepso]

Re: Link Bandido II New Schematic

I dream of high quality Bandido PCB, something like the Hammerhead board I got from Carl :-)