xl500 digital version by PRO-TR

[Micheal]

I hope you didnt mind Pro-tr I have started a new thread for you in this section
http://www.geotech1.com/forums/showt...t=14823&page=8




Today, 08:31 AM
ahmet19
Junior Member
Join Date: Jun 2009
Posts: 6



PCB scheme was okay. Please if there are mistakes, we fix the errors. I do not know English. I'm sorry.

[ahmet19]

ok micheal.
available on the pcb will take time. create the circuit, run it. software would be as follows:
menu:
With the up and down buttons
1. volume
2. 1. When playing with the sampling
3. 2. When playing with the sampling
4. Playing with the frequency of the pulse

be detected with the button in the soil environment, balancing the construction of metal (instead of the automatic ground balance)

Do you want to add to the software issue?

[smity]

for ahmet19

Dear ahmet19. As success with the software? You have already collected the device? Results?

[turaj afshar]

hi, plz pcb orginal an hex file
tanks

[Dr Vel]

Could someone post the hex or both hex and source for this project, I have a few 877a's and wish to experiment. Also a long time ago a member posted a 23.5 mb zip of the Bounty Hunter diagrams on rapidshare which is long ago removed. I would like this file since days of searching has not netted a single Pioneer diagram from google, nor do file searches yield the file Bounty_Hunter.zip. I am experimenting using the Pioneer 101 as my test bed and really do not want to be forced to reverse engineer the schematic unless it is my last resort. Thank you all.

[Pulse]

pro-tr able to complete this project? I am following you some other websites. But I didn't see any ended project.