PIM-2 Digital Metal Detector Project

[BlackDevil]

Hi Speedy_G
Thanks!
My LCD shows something like I2 or 12 after S1 and S2. This is not a problem.
Probably, it is the software of the LCD.
Will share results, when I finish the project.
Best regards!

[jap]

Hi Speedy_G & BlackDevil the PIM-2 detector is v.good,Good luck .best timej.

[BlackDevil]

[g.s]

GOOD EVENING TO ALL..
I have construction and I pim 2 ..with 30cm coil ,and my results were I had no big DEPTH detection,and that the processor creeps ARGOS is very appreciate ..Someone has fabrication YOU largest coil ..can to help me on this..
Thanks in advance g.s

[moscadondres]

Hi Jap,
Can you help me?Ihave try to program 4 atmega8 with usbasp on pony,extreme burner and others but i din'd could any program v05;can you tell me how you connect the atmega8;thank you.

[elizeu]

Congratulations for your work
I have been interested in mounting this equipment.
Elizeu from Brazil.

[vahit05]

elbombaci , Thank you

Hiii ı m from turkey ı made pim 2 detector. But its not working

[vahit05]

elbombaci , Thank you

Hiii ı m from turkey ı made pim 2 detector. But its not working

Hardware is not working
if you help me
ı ll glad

[darkobx]

I need a link to download DEMO HEX file V06.

[selim]

PIM-2 V06


http://asenkronusta.com/usta/forum/i...hp?topic=258.0
http://www.lugatek.com/forum/index.p...icseen#msg5931

[TANCE]

I'm doing PIM

[TANCE]

Display the normal but no sound

[TANCE]

Program download very slow start, horn ring boot, boot and then rang, and then the speaker does not ring, can see the detected metal show change, why

[TANCE]

No sound

[TANCE]

Display test normal no sound